Technical Data; Noise And Vibration Data - Worx WG708E Original Instructions Manual

TECHNICAL DATA

Type WG708E(705-719-designation of machinery, representative of Electric rotary mower)
Rated voltage
Rated power
Cutting diameter
Cutting height
Cutting height positions
Grass collection capacity
Protection class
Machine Weight

NOISE AND VIBRATION DATA

A weighted sound pressure
A weighted sound power
Wear ear protection
Typical weighted vibration
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate)
Electric lawn mower
L : 82.4dB(A) TURBO mode K
PA
L : 72.8dB(A) QUIET mode K
PA
3.16m/s
3.32m/s
Uncertainty K=1.5m/s
220-240V~50Hz
1600W
40cm
20-70mm
6
50L
/II
14.5kg
: 3dB(A)
PA
: 3dB(A)
PA
L : 96dB(A)
WA
TURBO mode
2
QUIET mode
2
7
2
EN