Weinmann & Schanz Heatapp! System Installation Instruction page 54

1. Switch the power supply for the heatapp! gateway on.
2. Connect the heatapp! USB-LAN adapter from the installation kit to
the heatapp! gateway and the PC / laptop:
A Plug the heatapp! USB-LAN adapter into a free USB port on
the top side of the heatapp! gateway.
B Start the PC / laptop. Connect the heatapp! USB-LAN adapter
to the network port of the PC / laptop.
Shortly thereafter, the set-up assistant starts automatically in the
browser window of your laptop. If the set-up assistant does not start
automatically, enter the address
browser.
3. Login using the password "gateway" and follow the instructions in
the set-up assistant.
After set-up the heatapp! gateway is successfully connected to the
customer network, the heatapp! base and the Internet if the LED on the
side heatapp! gateway remains a steady GREEN. Please refer to
section 5.2 "LEDs heatapp! gateway" to determine the meaning of other
conditions and for troubleshooting instructions.
4. After initial set-up using the set-up assistant, you enter the heatapp
gateway menu. Here you can register the heatapp radio modules
(see section 3.4 "heatapp! radio modules").
http://10.0.0.1 in the address line of the
EN - 21