Initial Operation / Initial Configuration - Weinmann & Schanz Heatapp! System Installation Instruction

3.2.4

Initial operation / initial configuration

Fig. 5: Initial set-up heatapp! base
1 heatapp! USB-LAN adapter
The initial set-up of the heatapp! base is performed based on a menu
control system via the browser-based set-up assistant of the connected
PC / laptop.
DHCP must be enabled in the network settings of the PC / laptop
(automatic address allocation) and no proxy server must be activated.
NOTE
Through updating of the device software by downloading via the
Internet additional costs may be charged depending on the customers
actual internet tariff.
EN - 15