Scsi-3 Mixed With Scsi-2 Option; Figure 2-2 Scsi-3 Daisy-Chain Option; Figure 2-3 Scsi-3 To Scsi-2 Daisy-Chain Option; Table 2-1 Termination Products For 68-Pin High Density Connector - Brand Innovations BI-0316 Technical Manual

Functional Description
This setup connects the BI-0316 to a 16-bit (WIDE) Single-Ended or Differential SCSI bus. Note that if
either the cable at the front or at the rear connector is not inserted, termination must be applied to this
connector. The following table contains a list of products to achieve this termination.
Termination Products for 68-pin High Density Connector
Table 2-1
Product Description
0-0869516-1 Amplimite .050 Series SCSI-3 Terminator Low Profile with Jack
Screws, Single-Ended 68 positions
0-0869515-1 Amplimite .050 Series SCSI-3 Terminator Low Profile with Jack
Screws, Differential 68 positions
When the cable at the front has to connect to an 8-bit device, special care has to be given to the Upper
Byte termination. See "Mixing Buses Having Different Widths" on page 3-3.
2.5.2

SCSI-3 Mixed With SCSI-2 Option

This option uses the BI-0318 to connect to the SCSI bus signals on the VMEbus P2.
Brand Innovators
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SCSI-3 Daisy-Chain Option
Figure 2-2
SCSI-3 to SCSI-2 Daisy-Chain Option
Figure 2-3
Page 2-4
BI-0316
Manufacturer
AMP
AMP
Technical Manual