Table of Contents
Advertisement
BI-0316
1.3
General Description
The 3.5" form factor devices supplied with a SCSI interface make it possible to design VMEbus mod-
ules which contain two of these devices in any combination.
The BI-0316 offers up to two drives, both with a full implementation of the SCSI bus on a single VME-
bus compatible module. Both drives have their own address on the SCSI bus and therefore operate
independently of each other. Drives with different widths and/or cabling options (SCSI-2 or SCSI-3) can
be mixed on the BI-0316. Both the Single-Ended and Differential option is supported.
The BI-0316 consists of a double Eurocard form factor base board with SCSI-2 and SCSI-3 type of con-
nectors. The base board contains no electronics except the light emitting diodes (LEDs) and ACFAIL*
buffers. On this board, 3.5" form factor devices are mounted which connect to the base board using
standard SCSI-2 or SCSI-3 cables. The LEDs are connected to the activity and fault signals of the
mounted devices. Rotary switches and jumper blocks are available for SCSI ID selection and enabling
of the termination of the SCSI bus signals.
1.4
Manual Updates
Manual Updates
Table 1-1
Revision
Changes
1.0
1.1
Editorial Changes
1.2
Position of jumper block and switches
1.5
Related Documents
Related Documents
Table 1-2
Document Title
Small Computer System Interface
Small Computer System Interface
SCSI-3 Parallel Interface
SCSI-3 Interlocked Protocol
SCSI-3 Architecture Model
SCSI-3 Primary Commands
SCSI-3 Block Commands
SCSI-3 Stream Commands
SCSI-3 Medium Changer Commands
Technical Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Additions
Deletions
SCSI-1
X3T9 - I/O Interface
SCSI-2
X3T9 - I/O Interface
SPI
X3T9.2/855D
SIP
X3T9.2/856D
SAM
X3T9.2/994D
SPC
X3T9.2/995D
SBC
X3T9.2/996D
SSC
X3T9.2/997D
SMC
X3T9.2/999D
Page 1-3
General Information
X3.131-1986
X3.131-1993
Draft
Draft
Draft
Draft
Draft
Draft
Draft
Brand Innovators
Advertisement
Table of Contents
