Advertisement
Attaching Propane Tank and Regulator
PARTS NE E DE D
•
2
×
Bungee Cords
•
1
×
Regulator (Flame Weeder Implement,
from Step 6)
•
1
×
20-lb Propane Tank (not included)
•
1
×
Hook-and-Loop Strap
14
Well-designed, quality tools and equipment
S T E P 9
1.
Strap the 20-lb propane tank (not in-
cluded) to the tank brace as shown. One
bungee is insufficient to securely hold the
tank—use two bungees.
2.
Attach the Regulator to the propane tank
valve as shown. Hand tighten the connec-
tor. The Regulator assembly attaches to the
propane tank valve with a left-hand thread.
Tighten with a counterclockwise turn.
3.
Towards the lower end of the short bar,
wrap the hoses and the bar with the
Hook-and-Loop Strap so that the hoses
are held neatly in place.
4.
Propane pressure can be adjusted using
the black knob on the Regulator. Try 20
psi to start.
↑ Pictured: Handle-mounted valve
| farmersfriendllc.com
Adjustments
A
Burner Angle
B
Burner Height
C
Handle Angle
D
Cart Height
E
Track Width
50°
B
90° +
A
D
Swap and invert axle
assemblies to
increase cart height.
See p. 16 for additional axle positions.
(931) 583-0397
| support@farmersfriendllc.com
C
60°
E
Expandable from 31"–38"
(Wide Cart Model from 42"–54")
15
Advertisement
