Polaris 800 INDY XC 129 2019 Owner's Manual page 77

THE PERFECT FIT
LEFT HAND CONTROL ALIGNMENT
A
1. Loosen the brake master cylinder mounting screws and move it away from
B
the left hand control .
CAUTION
Take care to avoid damaging hand warmer/brake switch wires when moving
components.
2. Loosen the four left hand control mounting screws.
3. Move the control block to the desired position.
NOTE
If the control is loose and was inadvertently moved without loosening the
screws, move the control block slightly to the left or right to relocate the pins.
75