Polaris 800 INDY XC 129 2019 Owner's Manual page 30

SAFETY
TUNNEL WARNING
The Tunnel Warning label is located on the rear of the tunnel.
WARNING
Hot Surface
Do Not Touch
Burn may result. Entire top of tunnel may be hot. Install
only accessories specifically approved for this model
by Polaris.
WARNING
Stay clear of track. Do not sit on seat back. Entanglement with the track or a fall
from seat back can result in severe injury or death.
MAX. 25 lbs.
CLUTCH WARNING/BELT REMOVAL
The clutch warning label
WARNING
Do not operate engine with hood or side
panels open.
Do not attempt adjustment with engine
running.
Do not operate engine with the clutch guard
removed.
Never run engine with drive belt removed.
Never service clutches yourself. Your dealer
can perform this service.
BELT REMOVAL - ALL UNITS
1. For electric reverse models, engine must be stopped in forward to allow
clutch opening.
2. Install L-wrench from fender into the open threaded hole in the driven clutch.
3. Turn the L-wrench clockwise to open the sheaves and replace the belt.
Return the L-wrench to the fender.
SEE OWNER'S MANUAL FOR SHEAVE WIDTH ADJUSTMENT
PROCEDURE.
28
e
is found on the oil bottle: