Table of Contents
Advertisement
SECO104-CX700M
pag. 36
User Manual - Rev. First Edition: 1.0 - Last Edition: 3.1 - Author: S.B. - Reviewed by G.M.
4.4.4 Parallel connected to
It allows the configuration of signals available on CN7 connector: FDC will set Floppy Support
Mode, LPT will set Parallel Port Mode.
4.4.5 Internal LPT
This option allows the selection of functioning mode of internal LPT parallel port. It can be set to
work in a standard mode, PS/2 mode, EPP mode (in this case, it can be selected if to work in 1.7
or in 1.9 mode), ECP mode or EPP + ECP mode or Disabled.
4.4.6 Internal LPT IRQ
When internal LPT is enabled, this option allows to choose which IRQ line is assigned to the
internal LPT1 (possibilities are IRQ 3, 4, 5, 6, 7, 9, 10, 11, 12 or None)
4.4.7 Internal USB Port Enabled
Using this option, it is possible to select if all USB ports have to work only in 1.1 mode or in a 1.1 +
2.0 compatible mode.
4.4.8 PCI INTA / Video / IRQ
This option allows to choose which IRQ has to be assigned to PCI INTA# line (possibilities are IRQ
3, 4, 5, 6, 7, 9, 10, 11, 12 or None), which is shared with internal video section, and USB ports.
4.4.9 Internal Audio
It enables or disables internal AUDIO section.
4.4.10 PCI INTB / audio IRQ
This option allows to choose which IRQ assign to PCI INTB# line (possibilities are IRQ 3, 4, 5, 6, 7,
9, 10, 11, 12 or None), which is shared with internal audio section.
4.4.11 Internal LAN
It enables or disables internal Ethernet section.
4.4.12 PCI INTC / LAN IRQ
This option allows to choose which IRQ assign to PCI INTC line (possibilities are IRQ 3, 4, 5, 6, 7,
9, 10, 11, 12 or None), which is shared with internal LAN section.
4.4.13 PCI INTD / USB 2.0 IRQ
This option allows to choose which IRQ assign to PCI INTD# line (possibilities are IRQ 3, 4, 5, 6, 7,
9, 10, 11, 12 or None), which is shared with USB 2.0 controller.
4.4.14 AGP 8x support
This item allows enabling or disabling internal AGP 8 X controller for communications of graphics
controller with system memory.
4.4.15 VGA shared memory size Mb
It is possible to choose the amount of the system memory that will be reserved exclusively for VGA
controller. This amount can be 8 MByte, 16 MByte, 32 MByte , 64 Mbyte or 128 Mbyte.
4.4.16 Graphics aperture size Mb
This item sets the size of system memory that could be dinamically accessed from the Graphics
controller, for its purposes. Possible values for this item are 32MB, 64MB, 128MB, 256MB, 512MB
or 1024MB.
Copyright © 2011 SECO s.r.l.
SECO104-CX700M
Advertisement
Table of Contents
