C Hipset C Onfiguration - Seco SECO104-CX700M User Manual

SECO104-CX700M
User Manual - Rev. First Edition: 1.0 - Last Edition: 3.1 - Author: S.B. - Reviewed by G.M.
4.4 Chipset Configuration
After the selection of this submenu, it will appear the following table:
The selections above shown are an example and they can be different from the default values.
4.4.1 Internal COMA / COMB I/O
It allows selection of base address for COMx serial port.
Allowed I/O addresses are:
3F8 (standard for COM1)
2F8 (standard for COM2)
3E8 (standard for COM3)
2E8 (standard for COM4)
220
228
238
338
Disabled.
4.4.2 Internal COMA/COMB IRQ
It allows associating the IRQ number to serial ports COMA and COMB. IRQ lines can be selected
in the list: None, 3, 4, 5, 6 ,7, 9, 10, 11 and 12.
4.4.3 Internal COMB Interface
It allows choosing the different types of serial port interface for serial port COMB (CN10, COM2):
RS-232; RS-422; RS-485.
Copyright © 2011 SECO s.r.l.
SECO104-CX700M
pag. 35