Table of Contents
Advertisement
EN
Solexa II
Rad io control system
Technical description, installation instructions
Item numbers 10144 (Display), 10150 (Set)
Elsner Elektronik GmbH Control and Automation Engineering
Sohlengrund 16
75395 Ostelsheim
Germany
Phone +49 (0) 70 33 / 30 945-0 info@elsner-elektronik.de
Fax
+49 (0) 70 33 / 30 945-20 www.elsner-elektronik.de
Technical support: +49 (0) 70 33 / 30 945-250
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Elsner Solexa II
Summary of Contents for Elsner Solexa II
- Page 1 Item numbers 10144 (Display), 10150 (Set) Elsner Elektronik GmbH Control and Automation Engineering Sohlengrund 16 75395 Ostelsheim Phone +49 (0) 70 33 / 30 945-0 info@elsner-elektronik.de Germany +49 (0) 70 33 / 30 945-20 www.elsner-elektronik.de Technical support: +49 (0) 70 33 / 30 945-250...
- Page 2 The change status (software release and date) can be found in the footnote. If you have a device with a later software release, please check on www.elsner-elek- tronik.de in the "Service" menu area whether a more up-to-date version of this document is available.
-
Page 3: Table Of Contents
4.5.1. Layout of the circuit board ................18 4.5.2. Mounting the weather station ................18 4.6. Instructions for assembling the weather station ......19 Initial start-up ................20 Solexa II Control • above Software-Version 1.9 • Version: 28.09.2016 Technical changes and errors excepted. - Page 4 Contents Solexa II Control • above Software-Version 1.9 • Version: 28.09.2016 Technical changes and errors excepted.
-
Page 5: Range Of Application And Functions
The basis of the system are the Solexa II display and weather station, which allow for automatic control according to time, indoor temperature, outdoor temperature, bright- ness, sun position, wind speed and precipitation. -
Page 6: Deliverables
Heating module RF-HE-St (above version 5) for two level heaters The wireless actuators with a production date after 14.01.2016 are compatible with the Solexa II system. The production date can be found as part of the serial number which has the following structure "DD MM YY consecutive number". -
Page 7: Weather Station
The product is compliant with the provisions of EC guidelines. Installation/assembly 4.1. Installation notes Installation, testing, operational start-up and troubleshooting should only be performed by an electrician. Solexa II Control • from software version 1.9 Version: 28.09.2016 • Technical changes and errors excepted. -
Page 8: Notes On Wireless Equipment
Elsner Elektronik is not liable for any changes in norms and standards which may occur after publication of these operating instructions. -
Page 9: Assembling The Wall Bracket
Turn the screws until the screw head is countersunk. Only then, the cover can be stuck. • Don‘t tighten the screw too tightly. The wall bracket must not bend. Solexa II Control • from software version 1.9 Version: 28.09.2016 • Technical changes and errors excepted. - Page 10 Ill. 3 Front view Stick the cover on to the wall bracket with the pre-assembled adhesive pads. (2b) Here the notch again points down- wards. Solexa II Control • from software version 1.9 Version: 28.09.2016 • Technical changes and errors excepted.
-
Page 11: Drill Sketch
4.3.3. Drill sketch Ill. 4 Printout not to scale! Use the wall bracket itself as a master/drill template! 81 mm 60 mm 56 mm Solexa II Control • from software version 1.9 Version: 28.09.2016 • Technical changes and errors excepted. -
Page 12: Disassembling The Wall Bracket
Temperature measurements can also be affected by external influences such as by warming or cooling of the building structure on which the sensor is mounted, (sun- light, heating or cold water pipes). Solexa II Control • from software version 1.9 Version: 28.09.2016 • Technical changes and errors excepted. - Page 13 North south. For installation in the southern hemisphere, the weather station must be aligned to face north. South Solexa II Control • from software version 1.9 Version: 28.09.2016 • Technical changes and errors excepted.
-
Page 14: Attaching The Mountattaching The Mount
With the hinge arm mounting, the weather sta- tion projects from beneath the roof overhang. Sun, wind and precipitation can act upon the sensors without hindrance. Solexa II Control • from software version 1.9 Version: 28.09.2016 • Technical changes and errors excepted. -
Page 15: Rear View And Drill Sketch
Dimensions of the rear side of the housing with holder, dimensions in mm. Diver- gences are possible for technical reasons. Oblong hole 7,5 x 5 mm Solexa II Control • from software version 1.9 Version: 28.09.2016 • Technical changes and errors excepted. -
Page 16: Preparing The Weather Station
A number of drives can be connected in parallel. When switching motors in parallel, check whether a group control relay is specified by the motor man- ufacturer. Group control relays can be obtained from Elsner Elektronik or from the mo- tor manufacturer. - Page 17 Motors with a power input exceeding 400 watt must be operated through a relay or contactor with its own power supply. Elsner Elektronik offers appropriate power supplies for direct current drives. Where re- quired, please enquire indicating the motor types, the manufacturer and – if available –...
-
Page 18: Layout Of The Circuit Board
Ill. 19 Check that the lid and lower section have properly latched into place! The diagram shows the closed weather station from below. Latch Solexa II Control • from software version 1.9 Version: 28.09.2016 • Technical changes and errors excepted. -
Page 19: Instructions For Assembling The Weather Station
Remove all transport protection stickers present after installation. The wind value measured is outputted ca. 30 seconds after the power supply has been connected. Solexa II Control • from software version 1.9 Version: 28.09.2016 • Technical changes and errors excepted. -
Page 20: Initial Start-Up
Proceed with the installation of the control system as follows: 1. Installation 2. Basic settings (including teaching the wireless users) see the manual Basic settings. 3. Setting the automatic, see manual Automatic. Solexa II Control • from software version 1.9 Version: 28.09.2016 • Technical changes and errors excepted.
Need help?
Do you have a question about the Solexa II and is the answer not in the manual?
Questions and answers