Advertisement
Assembly and Operation
•
Locate the control box on the side of the foot end motor. Plug the foot end motor (green plug)
into the 'FOOT' socket.
NOTE: It is very important to locate the plug correctly to avoid damage. Notice the location
of the lug on the plug and the socket to ensure correct alignment.
•
Plug the yellow banded bed-end motor into one of the sockets marked 'Hi-Low'.
•
Next, lift the bed-ends upright and align them. Lock the castors on one of the bed ends. Then
carefully lift the two parts of the frame together so the connecting brackets locate in the end of
the receiving frame.
•
Push the frames together fully, ensuring no gaps are present. Insert handknobs into the holes
and fully tighten, ensuring the threads of the handknob locate in the cut-outs of the connecting
bracket.
•
The connect the remaining motors and handset to the control box.
•
Note the direction of the connectors. The hand control connection is on the side of the control
box, the four motor connections are colour coded and labelled.
05
Advertisement
