Scope Of Delivery; Installation - iDM EIB/KNX Technical Documentation Installation Instruction

Navigator control 2.0
Table of Contents

Advertisement

D I E E N E R G I E F A M I L I E
3 . 3 . C onn ec ti on EI B / KN X b u s c a b le on t h e
EI B/ K NX m od u l e
The EIB/KNX- bus cable needs to be clamped on the
EIB/KNX-module.
No additional power supply is necessary for the EIB/
KNX module, this is done via the EIB/KNX bus con-
nection.
For the EIB/KNX bus the general restrictions for EIB/
KNX devices are applied.
For the connection of the bus cable to
the EIB/KNX module the correct con-
nection pole (-/+) has to be used.
3 . 4 . S ta tu s an z ei ge L E Ds
LED
LED Verhalten
KNX
LED glowing green
LED flickering red
LED short-time red
IP
LED glowing green
LED glowing red
LED flickering green
Mode
LED glowing green
LED glowing red
LED flashing 1x..10x green
LED flashing 1x..10x
orange
LED flashing 1x..5x green
LED flashing 1x..10x
orange
LED blinking red
3 . 5 . S c op e of d e live r y
- EIB/KNX module (KNX IP BAOS 774)
- Technical manual
(C) IDM ENERGIESYSTEME GMBH
Bedeutung
KNX bus voltage present.
Telegram traffic via the KNX Bus.
Communication error within the KNX bus.
Active ethernet-link and valid IP settings on the device.
Active ethernet-link and invalid IP settings or no IP settings from the DHCP-server to
the device
IP telegram traffic.
The device is working in normal operating mode.
Programming mode is active.
Programming mode is not aktive. manual mode (state BAOS) active.
the chosen BAOS connection (1...10) is free.
Programming mode is not active. manual mode (state BAOS) active.
the chosen BAOS connection (1...10) is occupied.
Programming mode is not aktive. manual mode (state BAOS) active.
the chosen tunnel connection (1...5) is free.
Programming mode is not active. manual mode (state BAOS) active.
the chosen tunnel connection (1...5) is occupied.
Programming mode is not active. Manual mode not active.
The device was not correctly loaded, e.g. after canceleing a download.
Technical manual EIB/KNX
bus cable clamps
LEDs

Installation

1
1
2
2
3
3
4
5
6
7
8
9
10
11
12
13
7

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for iDM EIB/KNX

Table of Contents