Installation; Description - iDM EIB/KNX Technical Documentation Installation Instruction

3. Installation

3. Installation
1 1
3 . 1 . D es c ri ptio n
2 2
With the EIB/KNX module it is possible to connect EIB/KNX devices to the heat pump. Via the KNX module
the heat pump can communicate with other EIB/KNX devices e.g sensors and actuators. Between those
3 3 devices data like temperatures, operating modes and so on can be exchanged and processed.
4
3 . 2 . C onn ec ti on EI B / KN X m o d u le
5
The EIB/KNX module is connected via a network cable to the Navigator 2.0 touchdisplay or the network socket
on at the heat pump case.
6
KNX Module
7
8
9
10
11
12
13
KNX Module
Before connecting the EIB/KNX module the heat pump must be set currentless!
For connection version 2 an additional switch (onsite) needs to be used, if a myIDM con-
nection is wanted.
6
Network
connection
myIDM
LAN
Network connection
to the router
Version 1: Connection via router/switch and myIDM-integration
Navigator 2.0
LAN
Network connection
Version 2: Connection without router/switch and without myIDM-integration
Technical manual EIB/KNX
Heat Pump
Navigator 2.0
Power supply
LAN
Network connection
Heat Pump
Power supply
LAN
Network connection
24V
LAN: X33
24V
LAN: X33
(C) IDM ENERGIESYSTEME GMBH
D I E E N E R G I E F A M I L I E