LG Hydro Kit ARNH10GK2A4 Installation Manual page 49

Test
CN_CC
Pump frequency setting(LPM)
HS Model Setting
Refrigerant Leak Sensor
IDU Address Verification
CN_EXT
ODU Function Master
Low Noise Mode Priority
Mode Standby / Piority Cooling
Password Initialization
Data logging
CAUTION:
There is no disinfection function in Hydro Kit.
So, external control equipment should be installed for disinfection function.
Setting Dry Contact installation set.
Setting water flow rate.
Setting whether to install HS Model or not
Setting whether to install Refrigerant Leak detector or not
Displaying the IDU address.
Setting whether to install IO Module or not
Setting ODU Function Master
Setting whether to control in IDU or in ODU
Setting mode standby When Master IDU is cooling mode.
Password Initialization
Data logging
Description
*Temp. = Temperature
*Sanitary water = Domestic Hot Water
Hydro Kit Installation Manual 49
System Set-Up