Installer Setting - LG Hydro Kit ARNH10GK2A4 Installation Manual

Installer Setting

How to enter installer setting mode
• In the menu screen, press [<,>(left/right)] button to select the setting category, and press [∧(up)]
button for 3 seconds to enter the password input screen for the installer setting.
• Input the password and press [OK] button to move to the installer setting list.
CAUTION
The installer setting mode is the mode to set the remote controller's detail function. If the installer
setting mode is incorrectly set, it may cause product failure, user's injury, or property damage. It
must be set by the installation specialist with the installation license, and if it is installed or changed
without installation license, all problems caused will be the responsibility of the installer, and may
void the LG warrenty.
h Installer setting password
Main screen → menu → setting → service → RMC version information → SW Version
Example) SW version : 1.00.1 a
In the above case, the password is 1001.
Note:
Some categories of the installer setting menu may not be available depending on the product
function or the menu name may be different.
OK
System Set-Up
OK
Hydro Kit Installation Manual 47