Miele SmartLine CSDA 7000 FL Operating And Installation Instructions page 7

Downdraft extractor
Table of Contents

Advertisement

Technical safety
Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and
repairs must only be carried out by a Miele authorised technician.
The downdraft extractor must only be installed and operated in
combination with those SmartLine appliances and cooktops
specified by Miele.
A damaged appliance is dangerous. Check it for any visible
damage. Never install or attempt to use a damaged appliance.
Reliable and safe operation of this downdraft extractor can only
be assured if it has been connected to the mains electricity supply.
The downdraft extractor must not be connected to the inverter of
an autonomous power supply, e.g. a solar power system. When the
downdraft extractor is switched on, power surges could result in a
safety switch-off. This may damage the electronic unit.
The electrical safety of this appliance can only be guaranteed
when continuity is complete between it and an effective earthing
system. It is most important that this basic safety requirement is
present and tested regularly and, where there is any doubt, the
household wiring system should be inspected by a qualified
electrician.
Before connecting the appliance to the mains electricity supply,
make sure that the rating on the data plate (voltage and frequency)
corresponds to that of the household supply.
This data must correspond in order to avoid risk of damage to the
appliance. Consult a qualified electrician if in any doubt.
Multi-socket adapters and extension leads do not guarantee the
required safety of the appliance (fire hazard). Do not use these to
connect the downdraft extractor to the mains electricity supply.
For safety reasons, this downdraft extractor may only be used
after it has been built in.
Warning and Safety instructions
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents