Installing The Downdraft Extractor - Miele SmartLine CSDA 7000 FL Operating And Installation Instructions

Installation
Installing the downdraft
extractor
The downdraft extractor can be
installed with the connector for the air
duct on either the right or the left-hand
side.
a Connector for air duct on the right
b Connector for air duct on the left
 Stick the supplied sealing strip under
the edge of the cover. Do not apply
the sealing strip under tension.
 Fit the clips onto the spacer bars.
 Guide the control cable downwards
between the spacer bars.
 Fit the cover onto the spacer bars.
46
 Remove the moisture collection tray
from the casing.
 Fasten the casing from the inside with
the screws  on the right and left 
sides (3 in each case).
 Fasten the moisture collection tray.
 Mount the air duct.
Ensure that the air duct is not under
mechanical tension after installation!