E-Box - Miele SmartLine CSDA 7000 FL Operating And Installation Instructions

E-box

a Mains connection cable
b Connection to window contact
c Connection socket for the fan power
cable
d Connection socket for the fan
control cable
e Connection socket for the control
unit cable
Connection to window contact, if
required

The window contact is
connected to the mains voltage.
Danger of electric shock!
Disconnect the downdraft extractor
from the mains electricity supply
before connecting the switching
system.
The connection cable of the
switching system must only be
connected by a suitably qualified and
competent electrician.
The connection cable of the
switching system must be of the
correct type and cross-sectional area
in strict accordance with current
national and local safety regulations
and must not exceed 2.0 m in length.
The switching system must be
equipped with a potential-free
contact suitable for 230 V, 1 A. The
extractor is switched off when the
switch is open.
Only use suitable switching systems
(e.g. window contact switches,
pressure switches).
The switching system must be
suitable for use with inductive loads
(BLDC motor).
Use switching systems in strict
accordance with current national and
local safety regulations.
Installation
47