VARISCO JE Series Instructions For The Use And Maintenance page 15

USE AND MAINTENANCE MANUAL - ELECTRICAL EQUIPMENT
PARTICULAR PRECAUTIONS
ATTENTION
All work such as commissioning, maintenance and repairs must be carried out by
The operator is prohibited from making changes to the control, switch and safety devices.
Unauthorized personnel must not control the machine/system or perform any
The following recommendations must be complied with when performing maintenance or repairs:

routine and extraordinary maintenance must only be assigned to technically qualified personnel;

electrical maintenance must be performed by a person who has appropriate knowledge/experience/information
to work safely. The word 'trained' is an attribute relative to:
• the type of operation;
• the type of system on or near which the work must be carried out;
• the environmental, contingent and monitoring conditions by the best trained personnel;

the risks associated with electrical work vary according to the type and degree of danger of the work itself. The
risks associated with each type of job must be evaluated, also in accordance with Legislative Decree 81/2008;

the maintenance technicians must:
 respect the limits of their skills;
 comply with the procedures and warnings described in this manual;
 respect the times and frequencies defined for scheduled maintenance;

use the safety devices and comply with the specific procedures prescribed by law for the implementation of
electrical work (live or not, depending on the case);

use specific equipment for electrical work, verifying their state before doing so;

verify the suitability of the environmental conditions (e.g. visibility in the intervention area);

do not use solvents and flammable materials;

do not climb on to the parts of the machine as they are not designed to carry people;

once the work is complete, correctly set and fasten all the protections and guards that were removed or opened.
ATTENTION
Use the indicated personal protective equipment (PPE) when cleaning the machine
Ed. 2010/09 - Rev. 00 - Cod. M08527
qualified personnel.
Such changes can only be carried out by qualified personnel.
ATTENTION!
kind of work on it!
(e.g. suitable gloves, dust masks, earplugs, etc.).
15/24