Details Of The Programmes And Options - Asko WT6332 Instructions For Use Manual

4 / PROGRAMMING YOUR MACHINE
•Maintaining your machine's performance
You must clean the drain pump filter regularly (for how to do this, see the section "CLEANING THE PUMP FILTER").
Important :
Your machine's performance can be affected if you do not clean the pump filter regularly.
For more details on the various functions, please refer to the sections "DETAILS OF THE PROGRAMMES" and "DETAILS OF THE OPTIONS".
Information:
After a power failure, when the power is restored, the washing cycle automatically resumes at the point where it was interrupted.
•SOME EXAMPLES OF PROGRAMMES
To select the most suitable programme for your type of washing, follow the instructions on the labels that most textiles bear.
Programmes table
COTTON
SYNTHETICS
HAND WASH/WOOLLENS
RAPID 40°
RINSE ONLY
SPIN ONLY
: These functions can be used alone or in combinations: no illogical combinations can be made.
Important :
* The cycle times are provided for an average value "without options". They may vary according to the wash load, the temperature,
etc.
— If you programme a "Prewash", you must add 18 to 25 minutes.
— If you programme "Extra rinse", you must add 17 minutes.
•DETAILS OF THE PROGRAMMES
The main programmes provided by the machine are as follows:
•COTTON
If your washing comprises hard-wearing white or coloured COTTONS.
Important :
When washing coloureds do not exceed a maximum
temperature of 60°C.
NB : During the first few minutes of the programme, your machine
automatically evaluates the washing load you have introduced and
adapts the water consumption and the length of the programme
accordingly to provide a perfect wash
•SYNTHETICS
If your washing comprises of DELICATE COLOURS, HARD-WEARING
SYNTHETICS or MIXED FIBRES
•HAND WASH / WOOLLENS
If your washing comprises NETTING, DELICATE FABRICS, FRAGILE
TEXTILES or "MACHINE-WASHABLE WOOLLENS ".
NB : A programme with agitation and spin phases specially adapted to
these types of fabrics
(Maintaining the pump filter):
Maximum
Cycle length *
Temperature
weight of
h = hour
(°C)
dry clothes
min = minute
(kg)
20° - 90° 6.0 2 h 03 - 2 h 20
20° - 60° 2.5 1 h 19 - 1 h 40
20°- 40° 1.5 30 min - 40 min
40° 2.5
-
-
• RAPID 30'
This programme enables you to refresh a small load of 2.5 kg of lightly
soiled washing composed of WHITES, COTTONS, COLOUREDS or
HARD-WEARING SYNTHETICS.
The cycle time is restricted to around 30 minutes
In this programme, the washing temperature is automatically programmed
at 40°C.
Important :
For this programme, the doses of detergent should be
reduced by half.
• RINSE ONLY
A separate rinse followed by a choice of:
— Either spin and drain
— Or drain only ("Drip-dry" option)
— Or a stop with the drum full of water.
• SPIN ONLY
This allows a separate spin and drain.
Important :
In the case of "Rinse only" followed by a spin or "Spin only",
ensure that you select a suitable spin speed for the type of washing
in the machine.
- 47 -
30 min
17 min
8 min
EN