Machine Troubleshooting - Windsor TRACER FS Operating Instructions Manual

MACHINE TROUBLESHOOTING

PROBLEM.
Excessive dusting
Poor sweeping
performance
Machine travels slowly
or not at all
4-19
CAUSE
Dust skirts and seals worn,
damaged, not adjusted
properly
Dust filter clogged or
damaged
Vacuum hose damaged
Vacuum fan not operated
Broom bristles worn
Brooms not adjusted
properly.
Debris caught in broom
drive mechanism.
Main broom drive failure
Side broom drive failure
Hopper dump door closed
Hopper full
Hopper floor skirts worn,
damaged
Low battery charge
Parking brake set
Fuse blown
Controller overheated
Controller failure
QTFSB 98351 04/25/03
SOLUTION
Replace or adjust skirts or seals.
Shake and clean or replace filter.
Replace vacuum hose.
Belt loose, broken or off pulley.
Replace brooms.
Adjust brooms.
Free mechanism of debris.
Belt loose, broken or off pulley.
Check circuit breaker. Check side broom motor
circuit.
Open dump door.
Empty hopper.
Replace skirts.
Charge batteries.
Release parking brake.
Replace fuse.
Allow controller to cool.
See Propelling System Troubleshooting