Maintenance Check
The first maintenance visit is recommended after 250
km (155 miles) or after 3 months from purchasing.
Additional service would be advised when necessary.
For example before the cycling season starts or before a
long cycling tour.
•
Check the wheels and tires (Bends in the wheels,
spoke tension, tire pressure, tire grip)
•
Tighten all mounting parts / bolts and nuts if
necessary
•
Check the brakes for wear and tear, adjust the
cable tension when needed and check the brake
function
•
Check the headset for slack, check the handlebar
stem and adjust when necessary
•
Clean the chain, put it to the right tension, and
lubricate with teflon spray
74
•
Electrical system: Fully charge the battery, clean
the motion sensor with lukewarm water and a
sponge, use contact spray for any contacs, grease
the battery contacts and battery rails with acid-free
vaseline and check the complete drive train for any
malfunction
•
Derailleur: Make sure all the gears run smoothly,
adjust when needed
Maintenance