Handlebars - Qwic TREND Series Manual

Handlebars

Desired handlebar setting
As a rule of thumb for determing the distance between
the handlebar and the saddle, you should be able to
touch the handlebars with your fist while you hold
your elbow at the point of the saddle. Note that this
rule of thumb should be seen as a guideline, because
this setting is very personal. Note also that a too large
distance between the saddle and the handlebars, can
often cause neck, back, and shoulder problems. We
recommend that you adjust the saddle and handlebars
to your wishes together with your dealer.
Adjusting the handlebars
By the quick release handlebar stam you can adjust the
handlebars in different directions, by sliding the little
lever on the left down to pull up the big lever. With the
quick release handlebar stam you can adjust the height
of the handlebars by, with the big lever up, tilting the
handlebars down to less than a straight angle. After
this, the Allen bolt is visible and accessible, after
loosening this bolt, you can adjust the height of the
handlebars.
*Attention! Do not forget to tighten the bolts after
adjustments and make sure that your handlebars are
firmly reattached.
63
Adjusting the bicycle