Philips 37PFL8694H/12 User Manual page 35

•
In universal remote control mode, the remote
control switches to TV mode after 30 seconds
if no key is pressed.
Enter an RC code to setup a universal mode
key (see 'Universal remote control codes' on
page 57 ).
Press the universal mode button (
or ) and
»
All four keys light up for one second
and the key stays lighted.
Enter the 4-digit RC code for the device.
If the code is accepted, all four keys blink
three times.
»
The universal mode key is set up.
If the code entered is incorrect, all keys
blink for two seconds. Re-enter the
correct code.
When setup is complete, press the
universal mode key to operate the device.
•
If the device does not react correctly, repeat
the setup with another RC code.
34
,
simultaneously.