Philips 37PFL8694H/12 User Manual page 32

You can use Scenea to display a picture as
wallpaper on your TV. Make sure that the
location of your TV is set to
Press .
Select [Scenea] , then press
»
The default or pre-loaded picture is
displayed.
•
Note: If the sleep timer is off, the wallpaper
is displayed for 240 minutes. Otherwise, it is
displayed for the duration of the sleep timer
(see 'Automatically switch the TV to standby
(sleep timer)' on page 25 ).
•
The fi le size of the picture must not be more
than 1MB.
Connect the USB storage device to the
TV.
Select
Select a picture, then press .
Select
Select , then press
Press any key to exit Scenea.
mode.
.
, then press .
, then press .
.
Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Check www.philips.com/support for availability.
When watching TV, press
»
The home menu appears.
Press the
.
Press .
»
The menu appears.
Press the
.
Press .
»
The version of the current software is
displayed.
Before performing this procedure be sure to:
• Set aside some time to complete the
entire update.
• Have available a USB storage device with
at least 256MB of storage space.
• Have access to a computer with a USB
port and internet access.
When watching TV, press
»
The home menu appears.
Press the
.
Press .
»
The menu appears.
Press the
Press .
»
The update assistant starts. Follow the
on-screen instructions to complete the
update.
( ).
to select
to select
>
( ).
to select
to select
> .
31