Philips 37PFL8694H/12 User Manual page 57

Note that HDCP (High-bandwidth Digital
Content Protection) support can delay
the time taken for a TV to display content
from a HDMI device.
If the TV does not recognize the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
If there are intermittent sound
disruptions, check that output settings
from the HDMI device are correct.
If you use an HDMI-to-DVI adapter
or HDMI to DVI cable, check that an
additional audio cable is connected to
or
only).
Check that your HDMI devices are
HDMI-CEC compatible. EasyLink features
only work with devices that are HDMI-
CEC compatible.
This behavior is normal when a HDMI
CEC/EasyLink-compliant device is
connected.
56
(mini-jack
Check that the USB storage device is
set to 'Mass Storage Class' compliant,
as described in the storage device's
documentation.
Check that the USB storage device is
compatible with the TV.
Check that the audio and picture fi le
formats are supported by the TV.
The transfer performance of the USB
storage device may limit the data transfer
rate to the TV, causing poor playback.
Check that your PC uses the supported
resolution and refresh rate.
Set the TV picture format to unscaled.
If you cannot resolve your problem, refer to the
FAQs for this TV at www.philips.com/support.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in this user manual.
•
Do not attempt to repair the TV yourself. This
may cause severe injury, irreparable damage to
your TV or void your warranty.
•
Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.