SOMFY animeo KNX Master Control W2 Manual page 106

animeo KNX Master Control W2/W8
Address
Selection
Adresswahl-
Switch
schalter
Address
0
1 - 254
255
 2011-2017, SOMFY ACTIVITES SA ALL RIGHTS RESERVED 2017/03/31
Manual
Meaning
The IP parameter is configured via the web-based management.
BootP, DHCP and application of the values from the EEPROM are
available to the user. In the default status, configuration via BootP is
activated.
The configuration of the IP address consists of the network address
(configurable and 192.168.1 by default) and the value set for the DIP
switch.
The DHCP protocol is used to configure the IP parameters.
31. March 2017
106/109