Vermeiren Lyna II Manual

Lyna II + wheels
Additional to the manual Lyna II, Lindsey.
The walking frame Lyna II can be changed to a
rollator by mounting four wheels under the walking
frame.
1. Technical Specifications
Description
Total width
Total length
Maximum height
Minimum height
Width (folded)
Length (folded)
Height (folded)
Distance between
handgrips
Weight
Maximum inclination
forwards
Maximum inclination
backwards
Maximum inclination
sideways
Maximum user weight
Turning diameter
Maximum angle handgrips
Storage temperature
We reserve the right to introduce technical changes.
Measurement tolerance +/- 15mm / 1,5 kg / °
2. Check after delivery
Unpack your product and verify if the delivery is
complete. Following items should be included:
Walking frame Lyna II
Wheels (4x)
Manual
Verify your product for transport damage. If
you find any damages after delivery proceed
as follows:
Contact the transporter
Have a list made of any problems
Contact your supplier
3. Safety rules
L
Check that the wheels / tips are
properly mounted to the walking frame.
L
The walking frame is only for indoor use.
Subject to technical alterations – vD - 2015-08
VERMEIREN
Opening up new horizons in mobility
Dimensions
540 mm
570 mm - 600 mm
1000 mm
820 mm
575 mm
850 mm - 1020 mm
120 mm
495 mm
3,4 kg
11,5°
7,5°
0°
130 kg
1260 mm
0° (not articulating)
3,5° (articulating)
+5°C - +41°C
4. Mounting / Removing wheels
Mounting wheels:
1. Press on the locking pin with your thumb.
2. Move the lower leg downwards and remove
these completely from the walking frame.
3. Grasp the wheel.
4. Mount the wheel to the walking frame and move
the wheel upwards to the desired height.
5. Check that the locking pin is firmly clicked in one
of the holes and the wheel is secured to the
walking frame.
6. Repeat instructions above for the tree other
wheels.
For removing the wheels and mounting the tips
you can use same instructions.