Toshiba e800 User Manual page 227

The remote device does not support this function.
Cause The remote device does not support OPP service.
Unable to send the object.
Cause Local Device is unable to send a contact, schedule, task, or
business card due to a problem with the signal or a similar
communications error.
Unable to receive the object.
Cause Local Device is unable to receive a contact, schedule, task, or
business card due to a problem with the signal or a similar
communications error.
Select the item you want to send.
Cause You have not selected an item to send.
Unable to store all receiving data due to insufficient memory.
Cause A contact, schedule, or task cannot be stored due to insufficient
memory.
Solution Delete any unneeded data to increase the memory capacity.
Name not specified in owner information.
Cause A name has not been specified in the Name area of the owner
information.
Solution Complete the owner information setting. A name is required.
Bluetooth Settings has not been started.
Cause The Bluetooth Settings program has not been started because
a Bluetooth device's power is not on in the Toshiba Pocket PC.
Solution Check the wireless switch to on position, and turn on the Blue-
tooth power from utility.
Program cannot be started because Bluetooth receiving program is
running.
Cause While the Bluetooth receiving program was running or the pop-
up menu was displayed as you were trying to receive a contact,
schedule, or task, you tried to send or receive another contact,
schedule, or task.
Solution You can only receive one contact, schedule, or task at a time
while the Bluetooth receiving program is running. Wait until you
have finished receiving the first object before sending or
receiving another object.
Program cannot be started because Bluetooth sending program is
running.
Cause The Bluetooth receiving program was executed while the
device search screen was displayed in the Bluetooth sending
program.
Solution Close the device search screen and try again.
Bluetooth Settings encountered an error and could not be executed.
Cause An error occurred in the initial settings of the Bluetooth Settings
program and the program could not be continued.
Chapter 12: Additional Information
227