entered in Network Key. Letters and numerals that can be
entered are 0-9 and A(a) - F(f).
•
Key Index:
This becomes enabled when WEP is selected. Select 1 - 4.
•
Enable network access using IEEE 802.1X:
Select to enable 802.1x validation function.
•
EAP type:
Select protocol for using 802.1x validation function.
■
TLS (EAP-TLS)
Transport Layer Security (TLS) protocol used by Windows 2000
Server, etc.
■
PEAP
Protected EAP Protocol (PEAP) used by Windows.NET Server
2003, etc.
Please ask your network administrator for further 802.1x validation proce-
dure details.
TMU Traffic Monitoring Utility
TMU Keeps users updated of current WLAN Module's activity status.
Icon Specification
Wireless Communication switch off:
The Wireless Communication Switch (on the bottom of the PDA) is turned
off. Tapping on the
Wireless communication switch!" Tap OK to close the dialog box. Turn on
the switch and you will see the
the original WLAN Module Power setting.
Wireless Communication power off:
The WLAN module is powered off. Tapping on the
"Power Wireless on" message. Tap the link to turn on the Wireless LAN
module power and then the
Wireless power on:
The WLAN module is powered on. Tapping on the
"Power Wireless off" message. Tap the link to turn off the Wireless LAN
icon gives you a warning message, "Please turn on
icon turns to
to
icon.
Chapter 8: Wi-Fi Wireless LAN
or
, depending on
icon displays a
icon displays a
115