Craftsman CMXELAYMPL1029 Instruction Manual page 6

English

WARNING: Tipping Hazard. To reduce the risk
of serious injury, always make sure the Support
Legs Collar Assembly is in its locked position
before using.
To return the tripod to collapsed carrying position, press
the Tripod Leg Lock 15 and pull the Support Legs Collar
Assembly upward.
14
Fig C
Tripod Height Adjustment (Fig. D)

WARNING: To reduce the risk of serious injury,
remove the work light before adjusting tripod
height.
To adjust height, release the Height Extension Lock(s)
and extend the tripod pole(s) to the desired height. Once
height is established, ensure the Height Extension Locks are
secured.
Fig D
Assemble Work Light(Fig. E,F,G)
Set Up the work light Assembly by placing the Bracket
Stand 11 on a flat and stable surface. Secure the Central
Handle with two Screws
6
(not included).
4
15
13
13
using a Philips screwdriver
12
Fig E
12
Secure the Work Light Head Stands
Stand 11 with Washers 10
both light heads are secured, hold the Central Handle
to align the lock pin to the mounting hole on the tripod
head 4 , squeeze the Quick Release Clip
assembly into the tripod head.
Fig F
2
9
10
11
4
Secure Power Cord Joint 3
Philips screwdriver(not included).
Fig G
Adjusting Light Direction (Fig. A, H)
6
12
11
2 to the Bracket
and Bracket Screws 9 . Once
6
5 and insert the
9
10
5
onto the Handle 6 by using a
6
3
2