Download Print this page

Craftsman 11407 Operator's Manual

19.2 volt fluorescent work light
Hide thumbs


Model No.
To reduce the risk of injury,
the user must read and understand
operator's manual before using this
Help Line: 1-800-932-3188
Sears, Roebuck
and Co., 3333 Beverly
Rd., Hoffman
IL 60179 USA
Visit the Craftsman web page:
Save this manual
for future



  Related Manuals for Craftsman 11407

  Summary of Contents for Craftsman 11407

  • Page 1 Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Visit the Craftsman web page: Save this manual 983000-711 5-05 LIGHT BATTERIES AND CHARGERS SOLD SEPARATELY Rd., Hoffman...
  • Page 2 If this Craftsman tool fails to give complete satisfaction within one year from date of purchase,RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will replace it, free of charge. If this Craftsman tool is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.
  • Page 3 WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. READ ALL INSTRUCTIONS • Know your worknght. Read operator's manual carefully. Learn its applications and limitations as well as the specific potential hazards related to this light.
  • Page 4 • Do not operate worklight or charger near flamma- ble liquids or in gaseous or explosive atmospheres. Internal sparks may ignite fumes. • Lens and bulb become hot during use: • During or immediately after use, don't lay worklight flat on lens surface or place lens area in contact with a plastic or fabric covered surface.
  • Page 5 WARNING| READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. • Before using battery charger, read all instructions and cautionary markings in this manua[, on battery charger, battery, and product using battery to prevent misuse of the products and possible injury or damage.
  • Page 6: Symbols

    Some of the following symbols may be used on this worklight. Please study them and learn their meaning. Proper interpretation of these symbols wirl allow you to operate the tool better and safer. SYMBOL NAME Volts Amperes Hertz Watt Minutes "_ Alternating Current ---=...
  • Page 7 The following s ignal words andmeanings areintended toexplain t helevels ofriskassociated withthis product. SYMBOL SIGNAL DANGER: WARNING: CAUTION: CAUTION: SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service tech- nician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair.
  • Page 8: Specifications

    PRODUCT SPECIFICATIONS Battery ... 19.2 Volt DC Charger Input ... 120 V,60 Hz, AC only Charge Rate ... 1 hour KNOW YOUR WORKLIGHT See Figure 1. Before attempting to use this product, familiarize yourself with all operating features and safety rules. HANGING / STORAGE H OOK SWITCH...
  • Page 9: Packing List

    UNPACKING This product has been shipped completely assembled. • Carefully remove the worklight and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the worklight carefully to make sure no break- age or damage occurred during shipping.
  • Page 10: Charging The Battery Pack

    WARNING: Do not allow familiarity with worklights to make you careless, Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Do not use any attachments or acces- sories not recommended by the manufacturer of this worklight.
  • Page 11 CHARGING A HOT BATTERY PACK When using the worklight continuously, the batteries in the battery pack will become hot. You should let a hot bat- tery pack cool down for approximately 30 minutes before attempting to recharge. When the battery pack becomes discharged and is hot, this will cause the green LED to come on instead of the red LED.
  • Page 12: General Maintenance

    See Figure4. To turn the Jighton and off, depress the switch trigger. WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields when using compressed air to clean worklights.
  • Page 13 WARNING: Lens and bulb become hot during use. Let worklight cool for several minutes after use before changing bulb to prevent possibility of a burn injury. FLUORESCENT TUBE REPLACEMENT See Figure6. When purchasingreplacementfluorescent tube, request replacement part number 7819602. TO REPLACE FLUORESCENT TUBE: •...
  • Page 14: For Recycling

    BATTERIES The battery pack for this worklight is equipped with nickel-cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing. The batteries in this worklight have been designed to pro- vide maximum trouble-free life. However, like all batteries, they will eventually wear out.
  • Page 15 Get it fixed, at your home or ours! For repair-in your home-of lawn and garden equipment, no matter who made it, no matter who sold itt For the replacement owner's manuals that you need to do-it-yourself. For Sears professional and items like garage door openers and water heaters. 1-800-4-MY-HOME Call anytime,

This manual is also suitable for: