Intelligent Eye Operation; To Start/Stop Comfort And Intelligent Eye Operation; Powerful Operation; To Start/Stop Powerful Operation - Daikin FTXTA30A2V1BW User Reference Manual

5 Operation
...is blinking
5 To confirm the selected setting press
Note: The display automatically returns to the default screen after
60 seconds. To return to the default screen sooner, press
twice.
5.6.2

Intelligent eye operation

The system detects movement in the room and automatically adjusts
the airflow direction and temperature in order to avoid direct contact
with people. If no movement is detected for 20 minutes, the system
switches to energy saving operation:
Operation Energy saving operation
Heating Temperature is lowered by 2°C.
Cooling and drying If the temperature in the room is:
▪ <30°C, the temperature is raised by 2°C
▪ ≥30°C, the temperature is raised by 1°C
Fan only Decreases airflow rate.
About the Intelligent eye sensor
NOTICE
▪ Do NOT hit or push the Intelligent eye sensor. Doing so
may lead to malfunction.
▪ Do NOT place large objects near the Intelligent eye
sensor.
INFORMATION
Powerful or Night set operation CANNOT be used at the
same time with Intelligent eye operation. The last selected
function takes priority.
▪ Detection range. Up to 9 m.
▪ Detection sensitivity. Changes according to location, the number
of persons in the room, temperature range, etc.
▪ Detection mistakes. The sensor may mistakenly detect pets,
sunlight, moving curtains, etc.
5.6.3 To start/stop Comfort and Intelligent eye
operation
1 Press one or more times.
Result: The setting will change as follows:
Display
+
—
Note: If there are people close to the front of the indoor unit or there
are too many people, use both operations at the same time.
2 To stop operation, press
from the LCD.
5.7

Powerful operation

This operation quickly maximizes the cooling/heating effect in any
operation mode. You can get the maximum capacity.
User reference guide
10
Vertical airflow function is...
turned ON
turned OFF
.
Operation
Comfort airflow
Intelligent eye
Comfort airflow and Intelligent eye
Both deactivated
until both symbols disappear
INFORMATION
Powerful operation CANNOT be used together with Econo,
Comfort airflow, Intelligent eye and Outdoor unit quiet
operation. The last selected function takes priority.
Powerful operation will NOT increase the capacity of the
unit if it already operates at maximum capacity.
5.7.1

To start/stop Powerful operation

1 Press to start.
Result: is displayed on the LCD. Powerful operation runs
for 20 minutes; after that, operation returns to the previously set
mode.
Mode
Cooling/Heating/Automatic
Drying
Fan only
2 Press to stop.
Result: disappears from the LCD.
Note: Powerful operation can be set only when the unit is running. If
you press , operation will be cancelled;
LCD.
5.8 Econo and Outdoor unit quiet
operation
5.8.1

Econo operation

This is a function which enables efficient operation by limiting the
maximum power consumption value. This function is useful for cases
in which attention should be paid to ensure a circuit breaker will not
trip when the product runs alongside other appliances.
INFORMATION
▪ Powerful and Econo operation CANNOT be used at the
same time. The last selected function takes priority.
▪ Econo operation reduces power consumption of the
outdoor unit by limiting the rotation speed of the
compressor. If power consumption is already low,
Econo operation will NOT further reduce power
consumption.
5.8.2

Outdoor unit quiet operation

Use Outdoor unit quiet operation when you want to decrease the
noise level of the outdoor unit. Example: At night.
Airflow rate
▪ To maximize the cooling/
heating effect, the capacity of
outdoor unit is increased.
▪ The airflow rate is fixed to the
maximum setting and
CANNOT be changed.
▪ The temperature can be set
only in Automatic mode.
▪ The temperature setting is
lowered by 2.5°C.
▪ The airflow rate is slightly
increased.
The airflow rate is fixed to the
maximum setting.
disappears from the
FTXTA30A2V1BW
Split system air conditioner
4P518786-4D – 2019.04