Table of Contents
Advertisement
Channel scanning
■ Automatic channel scan
If any menu screen doesn't show up at the fi rst
use of this unit (see "Initial setup"), you can search
channels by automatic channel scan. Also, you can
add new channels to the channel list.
1 Press SET UP to display the main menu.
2 Press
/
to select "Channel Search" then press
ENTER.
3 Press
/
to select "Auto Scan" then press
ENTER.
The channel scan will start.
■ Manual channel scan
This scan can search channels by specifying
frequency.
1 Press SET UP to display the main menu.
2 Press
/
to select "Channel Search" then press
ENTER.
3 Press
/
to select "Manual Scan".
SD-P120DTKE_ENG_01-68.indd 39
SD-P120DTKE_ENG_01-68.indd 39
4 Select "Channel No" using
desired channel, then press ENTER.
Scanning will start.
To cancel the search, press EXIT while pressing
SHIFT.
■ To reset to the factory default setting
1 Press SET UP to display the main menu.
2 Select "System Setting" using
ENTER.
3 Press
/
to select "First Time Installation" then
press ENTER.
The confi rm window appears.
4 Press
/
to select "Confi rm" then press ENTER.
To cancel the default setting, select "Exit" on
confi rmation window, then press ENTER.
When the default setting is complete, the Language
setting menu appears in the display.
/
and enter the
/
, then press
39
2008/01/17 19:14:26
2008/01/17 19:14:26
Advertisement
Table of Contents
