Toshiba SD-P120DTKE Owner's Manual page 86

Before calling service personnel (Continued)
Symptom Cause
The playback picture has • The disc is dirty.
occasional distortion.
• Player is in fast forward or fast reverse
mode.
• The player was moved or given a
shock.
• The disc is not set correctly.
Brightness is unstable or • The effect of copy protection. If you
noises are present in the connect the player to a VTR, TV/VTR
playback pictures. (Other combination or video selector, the
than built-in LCD monitor) playback picture may be distorted as
DVD video discs are copy protected.
The player does not start • No disc is inserted.
playback.
• An unplayable disc is inserted.
• The disc is loaded the wrong way
round.
• The disc is dirty.
• The parental lock function is set.
• The player is set to the external input
mode ("
Playback does not follow • It is in the repeat playback mode,
the course of the disc's memory playback, etc.
program.
Buttons do not work. • Power supply fl uctuations or other
abnormalities such as static electricity
may interrupt correct operation.
86
SD-P120DTKE_ENG_69-92.indd 86 SD-P120DTKE_ENG_69-92.indd 86
Correction
• Eject the disc and clean it.
• Sometimes a small amount of picture distortion may appear. This is
not a malfunction.
• Vibrating or shaking the player during playback may produce
distortion. This is not a malfunction. If not restored to usual status,
stop playback and start again.
• Eject the disc and load it again.
• Connect the player directly to the TV. Avoid connecting the player to a
VTR or TV/VTR combination.
• Insert a disc.
• Insert a playable disc. (Check the disc type, colour system and region
number.)
• Insert the disc with the playback side facing to the back of the unit.
48
.
• Clean the disc.
• Cancel the parental lock function or change the parental lock level.
• To play a disc with the player, "
AV-IN
"). MODE repeatedly so that you can view playback picture.
• These operations may prevent a proper progression of the contents.
• Turn the power on or off with the POWER switch. Or disconnect the
power cord and insert it into the wall outlet again.
DVD/CD
" needs to be set. Press
2008/01/17 19:15:11 2008/01/17 19:15:11