Before Calling Service Personnel - Toshiba SD-P120DTKE Owner's Manual

Before calling service personnel

Check the following guide for the possible cause of a problem before contacting service.
Symptom Cause
No power. • The AC adapter or power plug is disconnected. • Connect the AC adapter or power plug securely.
• The battery pack has been removed.
• Battery empty.
The LCD turned off by itself. • The automatic LCD off function turned the LCD off. • Turn on the player again.
No TV channels. • The aerial is not connected.
No TV channels after • Channel scan is not fi nished.
moving.
Picture noises and • Interference by wave refl ection or poor
distortion. aerial connection.
Dots on picture. • Reception is disturbed by vibration.
Stripes on picture. • Interference by other electric
apparatuses.
No picture on the LCD monitor. • The AV OUT jack is connected.
No picture. (Other than • The AV OUT jack is not connected to
built-in LCD monitor) the TV monitor.
No picture or Sound • The aerial connection is improperly
(When using the TV tuner.) positioned.
• The channel scanning is not set to
channels available in your area.
No sound. • The equipment connected via the
audio/video cable is not set to receive
DVD signal output.
• The volume is too low.
• The audio receiver or TV is turned off. • Turn on the equipment connected with the audio/video cable.
• The setting of output sound format is incorrect. • Select the proper audio setting.
SD-P120DTKE_ENG_69-92.indd 85 SD-P120DTKE_ENG_69-92.indd 85
Correction
• Install the battery pack.
• Re-charge the battery.
• Connect the aerial properly.
• Redo channel scan.
• Change the position and direction of the aerial.
• Move the aerial away from the cause of the interference.
• Move the aerial away from the cause of the interference.
• When you use the LCD of the player, unplug the AV OUT jack.
• Confi rm the connection, and select the appropriate video input mode
on the TV so the picture from the player appears on the TV screen.
• Connect the aerial properly.
• Set by scanning.
• Select the correct input mode of the audio receiver so you can listen
to the sound from the player.
• Adjust the volume by pressing the volume button.
85
2008/01/17 19:15:11 2008/01/17 19:15:11