1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. TV DVD Combo
  5. MD13Q11
  6. Service manual

Toshiba MD13Q11 Service Manual

Color television/dvd video player
Hide thumbs Also See for MD13Q11:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
FILE NO. 140-200503
(MFR'S VERSION A)

SERVICE MANUAL

COLOR TELEVISION/
DVD VIDEO PLAYER
MD13Q11
DOCUMENT CREATED IN JAPAN, February, 2005

Advertisement

Table of Contents
loading

Related Manuals for Toshiba MD13Q11

Summary of Contents for Toshiba MD13Q11

  • Page 1: Service Manual

    FILE NO. 140-200503 (MFR’S VERSION A) SERVICE MANUAL COLOR TELEVISION/ DVD VIDEO PLAYER MD13Q11 DOCUMENT CREATED IN JAPAN, February, 2005...

  • Page 2: Caution

    CAUTION THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS SERVICE MANUAL CARE- FULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE. USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

  • Page 3: Servicing Notices On Checking

    SERVICING NOTICES ON CHECKING 1. KEEP THE NOTICES 6. AVOID AN X-RAY As for the places which need special attentions, Safety is secured against an X-ray by consider- they are indicated with the labels or seals on the ing about the cathode-ray tube and the high cabinet, chassis and parts.

  • Page 4: Important Safeguards

    IMPORTANT SAFEGUARDS READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and use instructions should be followed.
  • Page 5 IMPORTANT SAFEGUARDS (CONTINUED) OUTDOOR ANTENNA GROUNDING If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
  • Page 6 IMPORTANT SAFEGUARDS (CONTINUED) EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING NEC-NATIONAL ELECTRICAL CODE ELECTRODE SYSTEM (NEC ART 250, PART H) S2898A...

  • Page 7: When Replacing Dvd Deck

    WHEN REPLACING DVD DECK [ When removing the DVD Deck ] Before removing Pick Up PCB and DVD PCB connector, the short circuit the position shown in Fig. 1 using a soldering iron. If you remove the DVD Deck with no soldering, the Laser may be damaged. [ When installing the DVD Deck ] Remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD PCB connector.

  • Page 8: Parental Control-Rating Level

    PARENTAL CONTROL - RATING LEVEL 4 DIGIT PASSWORD CANCELLATION If the stored 4 digit password in the Rating Level menu needs to be cancelled, please follow the steps below. Turn Unit ON. Set the DVD to the Stop Mode. Check that 'No disc' is displayed on the screen. Press and hold the 'STOP' button on the front panel.

  • Page 9: About Lead Free Solder (Pbf)

    ABOUT LEAD FREE SOLDER (PbF) Distinction of PbF PCB: PCBs (manufactured) using lead free solder will have a PbF printing on the PCB. (Please refer to figures.) Caution: • Pb free solder has a higher melting point than standard solder; Typically the melting point is 50°F~70°F(30°C~40°C) higher.

  • Page 10: Table Of Contents

    TABLE OF CONTENTS CAUTION ............................ A1-1 SERVICING NOTICES ON CHECKING ..................A1-2 HOW TO ORDER PARTS ......................A1-2 IMPORTANT SAFEGUARDS ..................... A1-3~A1-5 WHEN REPLACING DVD DECK ....................A1-6 DISC REMOVAL METHOD AT NO POWER SUPPLY ............. A1-6 PARENTAL CONTROL-RATING LEVEL .................. A1-7 TRAY LOCK ..........................

  • Page 11: General Specifications

    GENERAL SPECIFICATIONS CRT Size / Visual Size 13 inch / 335.4 mmV System CRT Type Normal Magnetic Field BV/BH +0.45G / 0.18G Color System NTSC Speaker 2 Speaker Position Front Size 1.5 x 2.7 inch Impedance 8 ohm Sound Output 1.5W + 1.5W 10%(Typical) DVD System...
  • Page 12 GENERAL SPECIFICATIONS On Screen Menu(TV) Display Menu Type Icon TV Setup Picture Audio Picture Preference Channel Setup TV/CABLE Auto CH Memory Add/ Delete V-chip Setup Language Sleep Timer CH / AV(LINE) / DVD Stereo/Audio Output Bilingual Control Volume Level Brightness / Contrast / Sharpness / Color Tint Bass/Treble/Balance Caption / Text...
  • Page 13 GENERAL SPECIFICATIONS G-10 On Screen Menu (DVD) Display Menu Type Icon Language Menu Subtitle Audio OSD Language(Set up Language) Video E.B.L. (Enhanced Black Level) TV Screen Size(4:3) OSD Display On/Off Picture Mode (Video/Film/Auto) JPEG Interval Audio DRC (Dynamic Range Control) Dialogue (On DRC[TV] / Off DRC[Std]) Surround System...
  • Page 14 GENERAL SPECIFICATIONS G-13 Remote Unit RC-KG Control Glow in Dark Remocon Remocon Format TOSHIBA Format TOSHIBA Custom Code 40-BF H, 44-BB H, 45-BA H, 45-BC H Power Source Voltage(D.C) UM size x pcs UM-4 x 2 pcs Total Keys 48 Key...

  • Page 15: Tray Lock

    GENERAL SPECIFICATIONS G-14 Features CABLE (TV) Auto Shut Off Auto Setup Auto CH Memory V-Chip USA V-chip CANADA V-chip Auto Search Game Position FM Transmitter Energy Star Closed Caption Comb Filter Protect of FBT Leak Circuit Picture Preference Choke Coil Power On Memory Features Tray Lock...
  • Page 16 GENERAL SPECIFICATIONS G-16 Interface Switch Front Power (Tact) Channel Up Channel Down Volume Up Volume Down Play Open/Close Skip+ /Search+ Skip- /Search- Still/Pause Stop Main Power SW Rear Main Power SW Indicator Power Yes (Red) Stand-by On Timer Terminals Front Video Input RCA x 1 Audio Input...

  • Page 17: Disassembly Instructions

    DISASSEMBLY INSTRUCTIONS 1-3: AV PCB/DVD BLOCK (Refer to Fig. 1-3) 1. REMOVAL OF MECHANICAL PARTS Remove the 2 screws 1. AND P.C. BOARDS Disconnect the following connectors: 1-1: BACK CABINET (Refer to Fig. 1-1) (CP301, CP302, CP401 and CP3800). Remove the 4 screws 1. Remove the AV PCB/DVD Block in the direction of arrow.
  • Page 18 DISASSEMBLY INSTRUCTIONS 1-5: DVD PCB/DVD DECK (Refer to Fig. 1-5) Short circuit the position shown in Fig. 1-5 using a soldering iron. If you remove the DVD Deck with no soldering, the Laser may be damaged. Remove the 4 screws 1. Remove the DVD Deck in the direction of arrow (A).

  • Page 19: Removal Of Dvd Deck Parts

    DISASSEMBLY INSTRUCTIONS 2. REMOVAL OF DVD DECK PARTS NOTE 1. Disassemble only the DVD DECK PARTS parts listed here. Minute adjustments are needed if the disassembly Loader Sub Ass'y is done. If the repair is needed except listed parts, replace the DVD MECHA ASS'Y.
  • Page 20 DISASSEMBLY INSTRUCTIONS 2-3: LOADING MOTOR PCB ASS'Y/ LOADING BELT 2-4: RACK LOADING/GEAR MAIN/GEAR PULLEY (Refer to Fig. 2-3-A) (Refer to Fig. 2-4-A) Press down the catcher 1 and slide the Rack Loading. Remove the Loading Belt. Remove the screw 1. Unlock the support 2 and remove the Gear Pulley.
  • Page 21 DISASSEMBLY INSTRUCTIONS 2-6: HOLDER TRAVERSE/INSULATOR (F)/INSULATOR (R) (Refer to Fig. 2-6-A) Rack Feed Ass'y Remove the Holder Traverse. Remove the 2 Insulator (F). Remove the Insulator (R). Insulator (R) Switch PCB Ass'y Traverse Ass'y Gear Motor Insulator (F) Traverse Ass'y Feed Motor Holder Traverse •...
  • Page 22 DISASSEMBLY INSTRUCTIONS [ 5 pin FFC ] ~ FEED MOTOR ~ Reinforcement Plate Reinforcement Plate BLUE (4) 10 ± 1mm ORANGE (3) Printing Surface 55 ± 1mm Switch PCB Ass'y Fold ~ SPINDLE MOTOR ~ Reinforcement Plate BLACK (2) Printing Surface Fold RED (1) Fold...

  • Page 23: Removal Of Anode Cap

    DISASSEMBLY INSTRUCTIONS 3. After one side is removed, pull in the opposite direction to 3. REMOVAL OF ANODE CAP remove the other. Read the following NOTED items before starting work. NOTE After turning the power off there might still be a potential Take care not to damage the Rubber Cap.

  • Page 24: Removal And Installation Of Flat Package Ic

    DISASSEMBLY INSTRUCTIONS 3. When IC starts moving back and forth easily after 4. REMOVAL AND INSTALLATION OF FLAT desoldering completely, pickup the corner of the IC using PACKAGE IC a tweezers and remove the IC by moving with the IC REMOVAL desoldering machine.
  • Page 25 DISASSEMBLY INSTRUCTIONS INSTALLATION 4. When bridge-soldering between terminals and/or the soldering amount are not enough, resolder using a Thin- 1. Take care of the polarity of new IC and then install the tip Soldering Iron. (Refer to Fig. 4-8.) new IC fitting on the printed circuit pattern. Then solder each lead on the diagonal positions of IC temporarily.

  • Page 26: Service Mode List

    SERVICE MODE LIST This unit is provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote control for more than the standard time (second).

  • Page 27: When Replacing Eeprom (Memory) Ic

    WHEN REPLACING EEPROM (MEMORY) IC If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to TABLE 1. NOTE: No need to set data after position INI 27. Table 1 Turn on the POWER, and set to the TV mode.

  • Page 28: Electrical Adjustments

    ELECTRICAL ADJUSTMENTS BEFORE MAKING ELECTRICAL FUNCTION FUNCTION ADJUSTMENTS OSD H COL. AV(MIN) OSD CONTRAST TINT AV Read and perform these adjustments when repairing the CUT OFF SHARPNESS AV H POSITION SUB BIAS circuits or replacing electrical parts or PCB assemblies. H.
  • Page 29 ELECTRICAL ADJUSTMENTS 2-4: WHITE BALANCE 2-7: VERTICAL SIZE NOTE: Adjust after performing CUT OFF adjustment. Receive the monoscope pattern. Using the remote control, set the brightness and contrast Place the set in Aging Test for more than 15 minutes. to normal position. Receive the gray scale pattern from the Pattern Activate the adjustment mode display of Fig.
  • Page 30 ELECTRICAL ADJUSTMENTS 2-10: OSD HORIZONTAL 2-13: TINT CENTER Receive the color bar pattern. (RF Input) Activate the adjustment mode display of Fig. 1-1. Using the remote control, set the brightness, contrast, Press the RIGHT/LEFT button on the remote control until the difference of A and B becomes minimum.
  • Page 31 ELECTRICAL ADJUSTMENTS 2-14: COLOR CENTER 2-15: CONTRAST MAX Receive the color bar pattern. (RF Input) Activate the adjustment mode display of Fig. 1-1 and Using the remote control, set the brightness, contrast, press the channel button (22) on the remote control to color and tint to normal position.

  • Page 32: Purity And Convergence

    ELECTRICAL ADJUSTMENTS PURITY AND CONVERGENCE 3-3: STATIC CONVERGENCE ADJUSTMENTS NOTE Adjust after performing adjustments in section 3-2. NOTE Receive the crosshatch pattern from the color bar Turn the unit on and let it warm up for at least 30 generator. minutes before performing the following adjustments.
  • Page 33 ELECTRICAL ADJUSTMENTS 4. ELECTRICAL ADJUSTMENT PARTS LOCATION GUIDE (WIRING CONNECTION) CRT PCB CD805 TP024 TP022 J801 CP802B CD802 VR3800 J4201 FB401 CP803A CD3800 CP401 AC IN S3801 S3802 CP3800 CP802A CP8002 VR401 CD302 CP302 CD301 SPEAKER CP8001 SPEAKER AV PCB DVD DECK CP2303 CP8101...
  • Page 34 DVD BLOCK DIAGRAM 2K EEPROM IC4002 BR24L02F DVD LOADER TV BLOCK DM-3S I CDAT I CCLK P.CON +3.3V, 1.8V REG A, C IC4006 BA33B00WHFP RF_A, B, C, D, E, F IRRCV MD_CD, MD_DVD OP-AMP VR_DVD, VR_CD IC2304 FPCTX BA10358FV FPCRX DVD/CD, DVD_LD, CD_LD MPEG/MICON/DSP/FR_AMP SPDIF...

  • Page 35: Tv Block Diagram

    TV BLOCK DIAGRAM RESET IC103 PST3231NR POWER TU001 ON/OFF OPEN/CLOSE MICON STOP IC101 OEC6084A X101 16MHz PLAY Q105 SKIP FF BUFFER 6 11 12 SKIP REW FROM DVD BLOCK DVD C DVD Y DVD_RESET R.OUT G.OUT V801 B.OUT IC4201 DVD_A_OUT_L Q4209~Q4212 NJM4580M MUTE SW...

  • Page 36: Power Block Diagram

    POWER BLOCK DIAGRAM Q3003, Q3004, Q3007 P.CON+3.8V OUT P.CON+3.8V 5V REG. DVD_H IC3001 KIA7805API P.CON+D5V L3800 DEGAUSS COIL Q3008 DRIVE AT+5.6V TRANSFORMER D3808, D3809, SWITCHING F3800 D3815, D3816 T3800 RECTIFIER SOUND+B 5V REG. IC3800 IC3002 KIA7805API Q3800 PS2561AL1-1-V(W) Q3803 FEED BACK P.CON+5V FEED BACK POWER...

  • Page 37: Dvd

    PRINTED CIRCUIT BOARDS DVD (BOTTOM SIDE) DVD (TOP SIDE) R2359 R2356 Q2305 Q2303 CP2301 R2303 CP2302 CP2303 Q2304 R2355 R2337 R2327 R2360 R2324 R2325 R2329 R2330 R2326 R2323 S801X R2328 C2307 Q2302 R2361 REFLOW W875 IC2304 R2335 R4061 R2309 B4009 C4032 C4001 C4096...

  • Page 38: Av/Crt

    PRINTED CIRCUIT BOARDS AV/CRT (INSERTED PARTS) SOLDER SIDE C4275 C434_1 VR401 D411 W094 W173 CP302 R2225 CP401 W172 IC302 W171 R2226 W169 W014 W168 W825 IC401 R346 W013 W167 W091 R323 HS401_1 W166 B301 S002X W012 W165 S802Y R418 W164 W042 W090 W041...
  • Page 39 PRINTED CIRCUIT BOARDS AV/CRT (CHIP MOUNTED PARTS) SOLDER SIDE R4210 R4241 Q4201 Q602 R4242 R634 R4216 R4201 R4221 R2214 Q4212 IC4201 R147 Q2201 R4238 R123 IC199_1 Q4209 Q4210 Q4211 Q101 R2219 R119 Q4203 R4209 R4237 Q105 IC103 R4236 R2215 Q3007 Q3001 Q605 R2218...
  • Page 40 PRINTED CIRCUIT BOARDS LOADING MOTOR (INSERTED PARTS) LOADING MOTOR (CHIP MOUNTED PARTS) SOLDER SIDE SOLDER SIDE CD2302 SOLDER SIDE D D0 0 CD2301 M2601 M2602...
  • Page 41 MPEG/MICON/DSP SCHEMATIC DIAGRAM (DVD PCB) C4038 0.01 B D4001 1SS355 JG001 UNREG+3.8V DUPTD1 JG002 JG003 BOOT2 LEVEL JG004 BOOT1 C4096 CONVERT FROM/TO AUDIO/VIDEO D4005 JG005 R4052 0.001 B Q4004 DUPTD1 KTC3875S_Y_RTK JG006 1SS355 DUPRD1 SYS_MUTE 4.7K V_SW JG007 DUPTD0 C4032 B4017 DAC_VIDEO_C JG008...
  • Page 42 MEMORY SCHEMATIC DIAGRAM (DVD PCB) 16M SDRAM 16M SDRAM FROM/TO MPEG/MICON/DSP IC4008 HY57V161610ETP-7 IC4009 HY57V161610ETP-7 FLASH IC 8M C4060 C4050_1 SD_A0 IC4007 SST39VF800A-70-4C-EKE SD_A1 0.1 F 0.1 F SD_A2 HA16 HA15 SD_A3 SD_D15 SD_D0 SD_D15 SD_D0 DQ15 DQ15 SD_A4 SD_A5 C4064 HA14 SD_A6...
  • Page 43 MOTOR DRIVER SCHEMATIC DIAGRAM (DVD PCB) FROM/TO MPEG/MICON/DSP OPE AMP IC2304 BA10358FV DM3S/3O DVD/CD DVD_LD CD_LD VR_DVD/CD VR_DVD/CD FROM/TO LODER OPU_A R2362 OPU_B OPU_C CP2301 3.3K OPU_D 09-5000-024-001-001 OPU_E OPU_F (W804) HOME (RF_GND) (W806) DVD/CDPD MON(DVD) TOUT_SW NC(SW) TIN_SW VR/DVD B2304 VOL(DVD) RF_A5V...
  • Page 44 AUDIO/VIDEO SCHEMATIC DIAGRAM (DVD PCB) CVBS FROM/TO MPEG/MICON/DSP C8105 W818 CVBS CVBS CVBS DAC_VIDEO_C DAC_C_VIDEO DAC_VIDEO_C DAC_VIDEO_B 12P CH L8102 P.CON+5V RESET 0305 C8108 W819 DAC_VIDEO_B DAC_B_VIDEO AMCLK 12P CH ABCLK L8103 FROM/TO REGULATOR ALRCLK ASDATA0 FFC(1.0mm pitch) 0305 S801Y P-H/I-L V_SW TP8101...
  • Page 45 REGULATOR SCHEMATIC DIAGRAM (AV PCB) FROM/TO POWER UNREG+12V UNREG+8V UNREG+5V FROM/TO POWER 5V REG IC IC3001 KIA7805API UNREG+12V 3.8V OUT Q3003 L3000 KTC4369 10uH TSL0808 W860 DRIVER DRIVER Q3004 Q3006 KTA1281_Y KTC3203_Y D3008 R3014 FROM/TO STEREO 1N4005-EIC 220 1/2W DRIVER R3006 P.CON+5V Q3010...
  • Page 46 MICON /TUNER SCHEMATIC DIAGRAM (AV PCB) FROM/TO IN/OUT 0 32.1 I2C_OFF REMOCON KEY_A D106 R119 KEY_B POWER_ON_H MTZJ12B DVD_H1 Q101 RESET IC KTA1504S_Y_RTK IC103 PST3231NR R125 4.7K 1/4W FROM/TO VIF/SIF/CHROMA R140 OSD_Y R144 D101 OSD_B R141 2.7K OSD_G 1SS133 R145 2.7K OSD_R 2.7K...
  • Page 47 VIF/SIF/CHROMA SCHEMATIC DIAGRAM (AV PCB) FROM/TO REGULATOR DVD_Y DVD_C P.CON+5V S002X P.CON+9V C4227 AT5.7VREG SWD_V_OUT 8.5VREG R625 FROM/TO DEFLECTION V.OUT H.OUT CHROMA IC IC601 C628 0.47 LA76319NM-MPB-E FROM/TO IN/OUT FRONT_VIDEO SWD_VIDEO W827 C622 R622 CLMP DVD_Y FROM/TO POWER APC1 390 1/4W W832 VIDEO CLMP...
  • Page 48 SOUND AMP SCHEMATIC DIAGRAM (AV PCB) SOUND_AMP IC IC302 AN7522N R311 C307 C348 270K 0.01 0.01 FROM/TO SPEAKER HS301 763WAA0310 L CH CP301 CD301 SPEAKER 213213102W1 C3121501 SP OUT L+ SP351 SG04D11BNA SP OUT L- 8 OHM R CH SPEAKER SP OUT R+ SP352 SG04D11BNA...
  • Page 49 IN/OUT SCHEMATIC DIAGRAM AT+5.6V (AV PCB) OS2202 PIC-37243SR Vout R2202 1001/4W POWER_ON_H Q2201 DTC124EKA R2214 R2216 R2218 R2220 R2221 1.5K 2.7K 5.6K REMOCON FROM/TO STEREO A_O_L AT+5.6V A_O_R SOUND_GND DVD_AUDIO_L KEY_A DVD_AUDIO_R DVD_H2 R2215 R2217 R2219 FRONT_A_IN_L KEY_B R4206_1 1.5K FRONT_A_IN_R FRONT_A_IN_R 2.2K 1/4W...
  • Page 50 STEREO SCHEMATIC DIAGRAM (AV PCB) L904 100uH FROM/TO MICON/TUNER TUNER_AUDIO R911 100 1/4W R912 100 1/4W FROM/TO SOUND AMP A_OUT_L A_OUT_R P.CON+12_A R908 C922 KANP FROM/TO IN/OUT A_O_R A_O_L DVD_AUDIO_L NC 0 DVD_AUDIO_R FRONT_A_IN_R FRONT_A_IN_L OUT SW IIC Decoder St.PLL Pilot Input Cancel...
  • Page 51 DEFLECTION SCHEMATIC DIAGRAM V.OUTPUT IC IC401 AN5522 THERMAL PROTECTION (AV PCB) PUMP UP 25.5 12.9 24.8 W843 TO DY CP401 A1561WV2-A5P W826 FROM/TO VIF/SIF/CROMA R413 R416 R412 V.OUT 3.3K 1/4W 1.8K 1/4W 1/4W R420 2.2K H.OUT R424 3.3K 1/4W HS401_1 763WSAA021 FROM/TO REGULATOR V801...
  • Page 52 FROM VIF/SIF/CHROMA CRT SCHEMATIC DIAGRAM CP802B (CP802A) B2013H02-6P CLAMP (CRT PCB) G.OUT R.OUT B.OUT CLAMP OFF FROM DEFLECTION CP803B (CP803A) B2013H02-4P HEATER 180V FROM/TO DEFLECTION CP801 (CD805) A2361WV2-2P 120.0 122.0 115.0 RED AMP GREEN AMP BLUE AMP Q804 Q805 Q806 2SC4217 2SC4217 2SC4217...
  • Page 53 POWER SCHEMATIC DIAGRAM (AV PCB) D3823 SB340FL-6737 FROM/TO DEFLECTION PH3800 PH3801 D3821 W818 003P-2100 003P-2100 DEGAUSS COIL L3800 RU2AM-EIC UNREG+12V 8R140031 CP3800 A1561WV2-2P TH3800_2 R3828 ZPB45BL3R0A 0.22 1W D3818 R3829 R3830 1N4937 1001/4W 1K 1/4W L3803 W5T_20X10X10A R3817 C3810 C3812 FROM/TO SOUND AMP S3802 WHITE...

  • Page 54: Loading Motor/Sw

    LOADING MOTOR/SW SCHEMATIC DIAGRAM (LOADING MOTOR PCB) (SW PCB) SSS-13-2 CD2302 2H052601 ESE22MH24 CD2301 SW-2(CLOSE) 2H062102 GND(SW) GND(SW) SW-1(OPEN) PICK UP INNER LIMIT SWITCH LOADING MOTOR(+) FEED MOTOR (-) M2602 LOADING MOTOR(-) BCZ3B03 FEED MOTOR (+) M2603 SPINDLE MOTOR (-) BCZ3B52 SPINDLE MOTOR (+) M2601...
  • Page 55 INTERCONNECTION DIAGRAM COMMAND TRANSMITTER TM101 Vout CP2301 COAXIAL OS2202 WHITE J4201 YELLOW FRONT VIDEO JACK FRONT AUDIO JACK FRONT AUDIO JACK J2203 J2204 J2202 HEADPHONE_JACK MON(DVD) MON(DVD) J2201 NC(SW) NC(SW) VOL(DVD) VOL(DVD) GND(DVD) GND(DVD) LD(DVD) LD(DVD) LD(CD) LD(CD) VOL(CD) VOL(CD) GND(CD) GND(CD) DVD PCB...

  • Page 56: Mpeg/Micon/Dsp

    WAVEFORMS MPEG/MICON/DSP POWER ON 10ns 500µs 0.2ms 500mV 500mV 1.0V POWER ON 100ns 10µs 1.0V 200mV 1.0V MEMORY POWER ON 10µs 50µs 200mV 500mV 1.0V MICON/TUNER VIF/SIF/CHROMA POWER ON POWER ON 200ns 20µs 0.2ms 500mV 0.5V 1.0V AUDIO/VIDEO POWER ON STANDBY 500µs 0.2ms...

  • Page 57: Sound Amp

    WAVEFORMS POWER ON DVD PLAY POWER ON 20µs 10µs 10µs 2.0V 0.5V 2.0V SOUND AMP STEREO POWER ON POWER ON POWER ON 10µs 2.0V 100mV 50mV POWER ON POWER ON POWER ON 10µs 2.0V 100mV 200mV IN/OUT POWER ON DVD PLAY POWER ON 10ms 0.5ms...
  • Page 58 WAVEFORMS POWER ON STANDBY 5µs 20µs 5.0V 5.0V POWER ON 20µs 5.0V POWER ON 20µs POWER ON 20µs POWER STANDBY 5µs 5.0V NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.

  • Page 59: Mechanical Exploded Views

    MECHANICAL EXPLODED VIEW PCB110 (CRT PCB ASS'Y) 101E 101C 101F 101B 101D 101A I1-1...
  • Page 60 MECHANICAL EXPLODED VIEW PCB130 (DVD PCB ASS'Y) PCBD20 (AV PCB ASS'Y) I1-2...
  • Page 61 MECHANICAL EXPLODED VIEW (PACKING DIAGRAM) 123, 124, 125, 126, 127, BL001, TM101 I1-3...

  • Page 62: Dvd Deck Exploded View

    DVD DECK EXPLODED VIEW Cannot supply separately. If the repair is needed, replace the LOADER SUB ASS'Y. M2603 PCB610 (LOADING MOTOR PCB ASS'Y) CD2302 CD2301 PCB640 CD2001 (SW PCB ASS'Y) Do not replace the parts. Because, minute adjustments are needed if this condition is disassembled further more.

  • Page 63: Mechanical Replacement Parts List

    MECHANICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description AE006042 7A7010084A FRONT CABI ASS'Y 101A AE006043 701WPJ1323 CABINET,FRONT 101B AD301664 713WPA0248 GLASS,LED 101C AD301663 713WPA0249 GUIDE,REMOCON 101D AD301657 723549A011 BADGE,BRAND 101E AD301661 735WPAA493 STOPPER,BUTTON 101F AE002895 735WPBA946 BUTTON,FRAME AE006044 A5R802X740L CABINET,BACK ASSY...

  • Page 64: Dvd Deck Replacement Parts List

    DVD DECK REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description AE005942 A5R801V650 DVD MECHA ASS'Y A5R801V650 AE005003 92P100109A HOLDER,TRAVERSE AE003550 92P100094A CLAMPER AE003551 92P100088A GEAR,MOTOR AE003537 92AAA0013A FEED RACK ASS'Y AE003538 92P200013A INSULATOR(F) AE003539 92P200014A INSULATOR(R) AE005929 92SBB0030A LOADER SUB ASS'Y AE003541 92P100095A...

  • Page 65: Electrical Replacement Parts List

    ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description RESISTORS ! R401 BZ210249 R3X28A331J R,METAL OXIDE 330 OHM 2W ! R402 BZ210240 R3X181221J R,METAL OXIDE 220 OHM 1W ! R408 BZ210009 R3X28AR82J R,METAL OXIDE 0.82 OHM 2W ! R418 BZ210053 R002T22R2J 2.2 OHM 1/2W...
  • Page 66 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description DIODES D3006 BZ410085 D2WXN40050 DIODE,SILICON 1N4005-EIC D3007 BZ410021 D97U05R61B DIODE,ZENER MTZJ5.6B T-77 D3008 BZ410085 D2WXN40050 DIODE,SILICON 1N4005-EIC D3009 BZ410090 D97U04R71B DIODE,ZENER MTZJ4.7B T-77 D3010 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77 D3011 BZ410006 D1VT001330 DIODE,SILICON...
  • Page 67 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description TRANSISTORS Q602 BZ510109 TCAA3875SY TRANSISTOR,SILICON KTC3875S_Y_RTK Q605 BZ510025 TPYJB05001 COMPOUND TRANSISTOR DTA114EKAT146 ! Q804 BZ510009 TC3F042170 TRANSISTOR,SILICON 2SC4217(D,E)-RAC ! Q805 BZ510009 TC3F042170 TRANSISTOR,SILICON 2SC4217(D,E)-RAC ! Q806 BZ510009 TC3F042170 TRANSISTOR,SILICON 2SC4217(D,E)-RAC Q2201 BZ510021...
  • Page 68 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description VARIABLE RESISTORS VR401 BZ210255 V1K62H3BT8 VOLUME,SEMI FIXED NVG6THTB222 VR3800 BZ210265 V1K63Q2BTE VOLUME,SEMI FIXED NVG6TLTAB471 P.C.BOARD ASSEMBLIES PCB110 AE006057 A5R802X110L PCB ASS'Y CCD006A PCB130 AE006058 A5R802X130L PCB ASS'Y DMD020A PCBD20 AE006059 A5R802XD20L PCB ASS'Y...
  • Page 69 ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description MISCELLANEOUS ! SP352 BZ614200 070C533019 SPEAKER SG04D11BNA TM101 AE006056 076D0KG010 TRANSMITTER ORT204N7404359-U ! TU001 AE005631 0163300016 RF UNIT 115-V-KA35AR ! TH3800 BZ410079 DF5EL3R0A0 DEGAUSS ELEMENT ZPB45BL3R0A ! V801 BZ614442 098Y1404C8 CRT W/DY A34JXV70X73N45...
  • Page 70 TOSHIBA CORPORATION 1-1, SHIBAURA 1-CHOME, MINATO-KU, TOKYO 105-8001, JAPAN...

This manual is also suitable for:

Md13q41Md13q41c

Table of Contents