HoMedics SOUNDSPA PREMIER Instruction Manual And Warranty Information page 10

Clock radio sound machine with time projection & temperature reading

Hide thumbs Also See for SOUNDSPA PREMIER:

Table of Contents

Available languages

Using the Projection Feature

1. To turn the projection feature on, press the projector ON/OFF button (Fig. 3) on

the back of the unit. The time & outdoor temperature is now projected on the wall

or ceiling.

NOTE: If the projection feature is OFF, you may hit the SNOOZE button

(Fig. 1) to trigger 5 seconds of projection.

2. The angle of the projector can be adjusted to angle on the ceiling or wall

by moving the PROJECTOR TUBE (Fig. 3) forward or backward.

3. To turn the angle of the time & temperature that appears on the wall or

ceiling, rotate the TIME ROTATION KNOB (Fig. 3) until you have reached

your desired result.

NOTE: The TIME ROTATION KNOB will rotate up to 350 degrees.

4. To focus the time & temperature on the wall or ceiling rotate the FOCUS

KNOB (Fig. 3) until you have reached your desired result.

Using Indoor Temperature

The unit will begin reading indoor temperature when it is plugged in. Allow a

few minutes for the correct temperature to register on the LCD display. (Fig. 2)

Using Outdoor Temperature

Be sure the SoundSpa unit is plugged in prior to the remote sensor

battery installation.

Table of Contents