Dvd Player · Receiver - Teufel Motiv 5 Technical Specifications And Operating Instructions

Adjustment to the DVD player
with 5.1 analogue output
The Motiv 5 itself has no built-in decoder func-
tion. Therefore it is "dependent" on the alloca-
tion of the external decoders when splitting the
signals. This decoder is a component of the DVD
player software. Its set-up options differ greatly
from appliance to appliance. Please consult the
handbook for your DVD player.
The following basic settings
should always be made:
4The front/centre/rear speakers should be
4Set the subwoofer to "on" or "yes" in the
4The optimal cut-off frequency is 120Hz. 100Hz
4Set the slider control on the subwoofer itself
16 Teufel · Motiv 5
Settings: DVD player · Receiver
defined in the speaker set-up menu (speaker
management/bass management) of the DVD
player as "small" or "normal" (not "large"!).
speaker set-up menu.
or 150Hz are also possible.
to "Bypass".
Adjustment to the AV receiver
During operation on the AV receiver, the Motiv 5 is
dependent on the AV receiver being set-up correctly.
Only when the receiver's decoder assigns the signals
optimally will all of the boxes of the Teufel speaker
set be activated, as the Motiv 5 itself has no built-
in decoder function. The set-up options for the AV
receiver differ greatly from appliance to appliance.
Please consult the handbook for your AV receiver.
The following basic settings
should always be made:
4Our front/centre/rear speakers should be
defined in the speaker set-up menu (speaker
management/bass management) of the AV re-
ceiver as "small" or "normal" or (not "large"!).
4Set the subwoofer to "on" oder "yes" on the
speaker set-up menu.
4The optimal cut-off frequency is 120Hz. 100Hz
or 150Hz are also possible.
4Set the slider control on the subwoofer itself
to "Bypass".