Av Receiver - Teufel Power Edition Concept E Magnum Technical Specifications And Operating Instructions

Connection to an AV receiver
Connecting the Concept E Magnum Power
Edition to an AV receiver .
The many and varied opportunities for using
the Concept E Magnum don't stop with an AV
receiver. Although designed to be fully active,
the set is partially active in cooperation with
an AV receiver. You can connect the Concept E
Magnum like a conventional speaker system: the
five satellites via the speaker cable to the cor-
responding speaker outputs front R/L, rear R/L
and centre of the AV receiver/amplifier and the
subwoofer from the front R input via a mono-
cinch cable to the sub out output to the A/V
receiver/amplifier.
Centre, rear view
Centre connection
AV receiver rear side
Centre connection
Rear right/front right
Satellite rear side
Satellite connection
Connection front and rear speaker
Centre

AV receiver

If the AV receiver/amplifier has preamplifier out-
puts for all channels (front R/L, rear R/L, centre
and subwoofer), the Concept E Magnum can also
be connected via three cinch cable pairs to the
subwoofer and the satellites via speaker cables
to the subwoofer. However, we recommend using
the first version.
Please note: The auto on/standby switch only
reacts when the front R input is being used! The
subwoofer also receives the full subwoofer signal
via this channel!
Front left/rear left
Subwoofer rear side
Subwoofer connection
Subwoofer connection
Subwoofer
AV receiver settings are
described in detail on page 15.
Information: In order to
guarantee that the automatic
on function (auto on) works
correctly, the front cinch
input (front right) has to be
used. The subwoofer input can
remain unoccupied.
13
· CEM Power Edition