Electric Connection; Filter And Pump Installation - Steinbach Speedclean Comfort 75 Assembly Instructions Manual

SpeedClean Comfort 75 / SpeedClean Comfort 50 / SpeedClean Eco 30 2012 V01
4.2 Electrical connection
Filtering equipment purchased by you is equipped with a connecting cable to be connected only to an electrical circuit with default power switch
(FI) with I (FI) with I (FI) with I (FI) with I ≤ 30mA. ≤ 30mA. ≤ 30mA. ≤ 30mA.
.DELTA.n .DELTA.n .DELTA.n .DELTA.n
Mounting the default power switch it must be done by a professional electrician and be in accordance with local regulations. The electrical Mounting the default power switch it must be done by a professional electrician and be in accordance with local regulations. The electrical
installation must be performed by a local company of electrical installations according to relevant national regulations for swimming pools (in
Austria EN1 Part 4 §49, in Germany DIN 57100, VDE 0100 part 702 and part 702), taking into account the protection areas . To avoid the Austria EN1 Part 4 §49, in Germany DIN 57100, VDE 0100 part 702 and part 702), taking into account the protection areas . To avoid the
danger of electrical shock, do not use extension cords.

Filter and pump installation

4.3
75/50 Comfort SpeedClean
Comfort SpeedClean 75/50 + Eco 30
.
To avoid damaging the filter vessel or the sieve bottom before placing sand filter vessel should be filled with 20 to 30 cm of water.
5. Fill the chamber of sand (all models)
Place the silica sand (grain size 0.4 to 0.8 mm) within the grit chamber. In doing so, be careful not to
get sand in pure water chamber (see figure).
ATTENTION
IMPORTANT
6