Accessories Required; Scope Of Delivery - Kathrein BAS 66 Skew Instructions Manual

Accessories required

Sat jointed masts to mount BAS 66 Skew.
• HDM 140 BN: 218456
• HDM 141 BN: 218457
• HDM 143 BN: 218458

Scope of delivery

The BAS 66 Skew planar antenna is preassembled in the factory before delivery.
Reception area/Footprints
The footprint is the reception area on the earth that a satellite covers with its transmission beam (spot), within which satellite reception
is possible. The transmission power is at its greatest in the centre of this spot – it becomes progressively weaker moving outwards.
You should preferably align your antenna to the position of the ASTRA satellite 19.2° East or EUTELSAT/HOTBIRD 13° East. The spots for
these satellites are shown below.
The red line of the footprint
here shows the area
covered with digital signals
by the ASTRA satellites.
The satellites broadcast the various channel packages in different footprints. The respective channel packages can normally be
received within these footprint zones. In the marginal zones, reception is possible, although because of a variety of influencing factors
this cannot be guaranteed. The quality of the channels received can vary considerably (for instance due to environmental factors).
All three types include laid
cables and plugs.
ASTRA 19,2° East
BAS 66 Skew Sat jointed mast
Fig. 1
EUTELSAT/HOTBIRD
13° East
2 / 12