Specifications; Module Specifications - Toshiba V Series User Manual

Chapter 2 Specifications

2.1 Module Specifications

The main specifications of the ASCII module are as follows.
Function
Transmission interface
Transmission capacity
Transmission mode
Communication mode
Activation method
Transmission speed
Transmission format
Transmission code
Transmission distance
Data buffer
External connector
RAS function
Terminating resistor
Withstand voltage
Maximum current consumption
Weight
Notes
(1) A single ASCII module consumes 1A.
Install the ASCII module so that the current consumption of the installed modules do not
exceed the power capacity.
(2) Use D-SUB 25 pin male connectors on the connecting cable.
6F8C0870
Item
RS232C/RS485
2 channels supported simultaneously
ch1: Select either RS232C or RS485
ch2: RS232C
1 text up to 896 bytes
Asynchronous
Full duplex
Contention
300, 600, 1200, 2400, 4800, 9600, 19200bps
Start bit:
Data length: 7/8 bits
Parity:
Stop bits:
ASCII code
RS232C:
RS485:
Transmit: 448W, Receive: 448W
D-SUB 25 pin female connector
M2.6 screw
Self-diagnosis, transmission error check, Watchdog timer
(200ms)
10 MΩ or more (500 Vdc) (between input pin and internal)
circuit.
500 Vac, -1 minute (between input pin and internal circuit)
1.0 A (5 Vdc)
500g
2
Specification
1 bit
None/Odd/Even
1/2 bits
up to 15m
up to 1km
7