Connecting A Vcr; Connecting A Cable Converter Box; Black; E) 46/52/62Hmx85 - Toshiba 52HMX85 Owner's Manual

Connecting a VCR

This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
• two coaxial cables
• one set of standard A/V cables
From Cable Box or Antenna
IN from ANT OUT to TV
CH 3
CH 4
TV

Connecting a cable converter box

This connection allows you to watch basic and premium cable channels.
To watch basic cable and use the TV's features, select ANT-1. To view
premium channels, select ANT-2, tune the TV to channel 3 or 4
(whichever channel is vacant in your area), and use the converter box
to change channels.
You will need:
• three coaxial cables
TV
Model 46HMX85 is equipped with one HDMI input terminal and one set of AUDIO IN
jacks.
#01E08-16_46/52/62HMX85 9

Black

(E) 46/52/62HMX85

Stereo VCR
IN
OUT
L R
VIDEO
AUDIO
From Cable
OUT
Cable converter box
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an
S-video cable (in the S-video jacks) instead
of a standard video cable.
Do not connect a standard video cable and
an S-video cable to VIDEO 1 (or VIDEO 2) at
the same time, or the picture performance
will be unacceptable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under Copyright
Law and may subject you to civil and
criminal liability.
Note:
When you use a converter box with your TV,
the remote control may not operate some
features, such as programming your favorite
channels, labeling channels, and locking
channels.
IN
5/10/05, 12:39 PM
9