Connecting Two Vcrs; Connecting A Camcorder; Black; E) 46/52/62Hmx85 - Toshiba 52HMX85 Owner's Manual

Connecting two VCRs

This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a videotape. You also can record from
one TV channel while watching another TV channel.
You will need:
• two coaxial cables
• two sets of standard A/V cables
From
Antenna
VCR1
IN from ANT OUT to TV
CH 3
CH 4
TV
VCR2
CH 3
CH 4

Connecting a camcorder

This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one set of standard A/V cables
Model 46HMX85 is equipped with one HDMI input terminal and one set of AUDIO IN
jacks.
14
#01E08-16_46/52/62HMX85 14

Black

(E) 46/52/62HMX85

IN
OUT
L R
VIDEO
AUDIO
* **
VIDEO AUDIO
L R
IN
OUT
Camcorder
VIDEO AUDIO
OUT
L
Video-3 (side panel)
R
Note:
If you have a VCR (VCR1) with S-video, use
S-video cables instead of standard video
cables for better picture performance. Do not
connect both a standard video cable and an
S-video cable to VIDEO 1 (or VIDEO 2) at
the same time or the picture performance will
be unacceptable.
Do not connect the same VCR to the output
and input jacks on the TV at the same time.
To dub or edit, VCR 2 must select Line IN,
and the TV must select VIDEO 1 (see
"Selecting the antenna input" on page 26).
* The VIDEO OUT jack does not output the
POP picture.
** The AUDIO OUT jacks can output the
sound of either the Main or POP picture
(see "Selecting the AUDIO OUT sound" on
page 58).
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under Copyright
Law and may subject you to civil and
criminal liability.
Note:
If you have a camcorder with S-video, use an
S-video cable instead of a standard video
cable for better picture performance. Do not
connect both a standard video cable and an
S-video cable at the same time or the picture
performance will be unacceptable.
5/10/05, 12:39 PM