Toshiba 52HMX85 Owner's Manual page 63

How to replace the lamp unit (continued)
8. Reattach the lamp unit door, making sure to insert the hooks on
the left side of the lamp unit door inside the opening in the TV
cabinet.
Insert the hooks inside
the TV cabinet opening.
9. Replace the thumb screw and hand-tighten.
NOTE :
securely; otherwise, the TV may not turn on.
10. Plug in the power cord and turn on the TV. After the initial warmup
period (which may take several seconds for full picture brightness),
the TV should operate normally. If any of the following conditions
exist, turn off the TV, unplug the power cord, and repeat steps 1–9
to ensure that the lamp unit and lamp unit door are installed
correctly:
• No picture
• Dark picture
• TV will not turn on
If, after repeating steps 1–9, the problem still exists:
Locate the nearest Toshiba authorized service depot by
directing your web browser to www.toshiba.ca; click "Home
Entertainment," and then click "Support."
#01E60-64_46/52/62HMX85 63
Black
(E) 46/52/62HMX85
Lamp unit door
Thumb screw
(hand-tighten only)
Lamp unit door
Make sure the lamp unit door is installed
5/10/05, 12:39 PM
63