Mounting The Ops Computer On The Monitor - Toshiba TD-E501 Owner's Manual

Mounting the OPS computer on the monitor

1. Turn off the main power switch to the monitor and disconnect the power cord.
Be sure to disconnect the power cord to prevent breakdown and electric shock.
2. Unscrew 2 screws and remove the option cover.
NOTE : Retain the option cover you have removed because it is replaced when the OPS computer is not
fitted.
2. Insert an OPS computer (commercially available) in the option slot and secure it on the monitor using the
2 screws that you have removed in step 2.
After installing the option slot cover, ensure that the OPS computer is positioned and
oriented properly and then insert it fully into the slot. The device may be damaged if installed in an incorrect
position and orientation.
Removal of the OPS computer
Hold the handle if provided on the OPS computer for removal.
Extract the OPS computer by using the handle only. Pulling on the cable or other means
may cause damage.
English - 13 -