Mounting In Portrait Position; Connect Power Code; Avoiding Image Retention - Toshiba TD-X552M User Manual

1.6.

Mounting in Portrait Position

This display can be installed in portrait position.
1. Remove the table stand, if attached.
2. Rotate 90 degrees anticlockwise. Key board comes in the lower right position when facing the display at the back.
1.7.

Connect Power code

1. Confirm Main Switch is switched off before Making any connections. .
2. Use AC socket near the display.
1.8.

Avoiding Image Retention

Do not display static (non-moving) content on the display for long periods of time.
This may cause image "burn-in" or image retention, which is not covered under warranty.
Avoid Static Content
• Display dynamic (moving) images whenever possible.
• Turn off the display when not in use, or use the scheduling feature (refer to General Setting on page 23) to automatically turn off the display at preset
times of the day.
Set pixel shift ON
• To help prevent image retention, set Pixel Shift (refer to General Settings on page 25) to On.
90
90
5
TD-X552M/TD-X552X