Adjusting The Amplifier's Audio; Other Regza-Link; Functions; Connecting A Toshiba Pc Compatible To Regza-Link - Toshiba 46WX800 Owner's Manual

Adjusting the amplifier's audio

Using the TV's remote control, you can adjust or mute
the sound volume of your amplifier. First, set the
MODE SELECT switch on the remote control to TV.
•z Z adjust the volume level.
• turns off the sound.
Y > PREFERENCES > REGZA-LINK Setup >
1
.
OK
2
Press B or b to highlight Speaker Preference.
3
Press C or c to select Amplifier.
Note: Confirm that a connected REGZA-LINK
(such as DVD player, etc.) is selected for the Amplifier
input source.
Note:
• You can also use this function when the amplifier is
connected to the TV's DIGITAL AUDIO OUT terminal
(not HDMI connection). Select a digital audio input mode
on the amplifier.
• These functions depend on the device connected.

Other REGZA-LINK

When Enable REGZA-LINK and all items in the
REGZA-LINK Setup menu are set to On, the following
functions will be enabled.
Item Description
TV Auto If a REGZA-LINK
Power the TV turns on automatically.
If the TV is turned off, the TV will send a
Auto Standby message to turn off all of the REGZA-
LINK devices connected to the TV.
If Amplifier Control is set to On, you can
Amplifier
adjust the sound volume or turn off the
Control
sound using the remote control.
From this item, you can set your audio
output preference to the TV speakers or
the amplifier. When this item is set to
Amplifier, the remote control can be used
Speaker
to adjust or mute the volume of the
Preference
audio. This item will be not available and
set to TV Speakers automatically unless
a REGZA-LINK
receiver is connected.
Note: When you turn on the amplifier, change its input
source, or adjust the sound volume, the sound will be
output from the amplifier's speakers even if TV Speakers
has been selected. Turn the TV off and on again to output
the sound from the TV speakers.
44
Chapter 6: Basic features
®
device
®

functions

®
device is turned on,
®
compatible audio
®
To set the REGZA-LINK
Y > PREFERENCES > REGZA-LINK Setup >
1
.
OK
2
Press B or b to highlight Enable REGZA-LINK.
3
Press C or c to select On.
Note: If you set Enable REGZA-LINK to Off, the other
items under REGZA-LINK Setup will be grayed out.
4
Press B or b to select a REGZA-LINK setup item.
Press C or c to select On or the desired mode.
• TV Auto Power: On/Off
Auto Standby: On/Off
•
• Amplifier Control: On/Off
Speaker Preference: TV Speakers/Amplifier
•
Connecting a Toshiba PC
compatible to REGZA-LINK
This feature automatically sets suitable widescreen
formats and picture preferences when the TV is
connected to a Toshiba PC compatible with REGZA-
®
LINK .
Note: This feature depends on the equipment connected.
Setup:
®